Re: [PATCH v5 1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 4/8/2020 9:14 AM, Stephen Boyd wrote:
Quoting Sandeep Maheswaram (2020-03-26 00:06:07)
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
new file mode 100644
index 0000000..0f69475
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
[...]
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: The interrupt that is asserted
+          when a wakeup event is received on USB2 bus.
+      - description: The interrupt that is asserted
+          when a wakeup event is received on USB3 bus.
+      - description: Wakeup event on DM line.
+      - description: Wakeup event on DP line.
I can see that it was optional before but that still doesn't make sense
to me. The glue hardware from qcom always has interrupts so I'd expect
it to be required in the binding.
Will add in next version.

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux