R: [PATCH 08/12] devicetree: bindings: pci: add phy-tx0-term-offset to qcom,pcie

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Messaggio originale-----
> Da: Rob Herring <robh@xxxxxxxxxx>
> Inviato: martedì 31 marzo 2020 19:33
> A: Ansuel Smith <ansuelsmth@xxxxxxxxx>
> Cc: Stanimir Varbanov <svarbanov@xxxxxxxxxx>; Andy Gross
> <agross@xxxxxxxxxx>; Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>;
> Bjorn Helgaas <bhelgaas@xxxxxxxxxx>; Mark Rutland
> <mark.rutland@xxxxxxx>; Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>;
> Andrew Murray <amurray@xxxxxxxxxxxxxxxxxxxx>; Philipp Zabel
> <p.zabel@xxxxxxxxxxxxxx>; linux-arm-msm@xxxxxxxxxxxxxxx; linux-
> pci@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx
> Oggetto: Re: [PATCH 08/12] devicetree: bindings: pci: add phy-tx0-term-
> offset to qcom,pcie
> 
> On Fri, Mar 20, 2020 at 07:34:50PM +0100, Ansuel Smith wrote:
> > Document phy-tx0-term-offset propriety to qcom pcie driver
> 
> propriety?
> 
> >
> > Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
> > ---
> >  Documentation/devicetree/bindings/pci/qcom,pcie.txt | 7 +++++++
> >  1 file changed, 7 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> > index 6efcef040741..8c1d014f37b0 100644
> > --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> > @@ -254,6 +254,12 @@
> >  			- "perst-gpios"	PCIe endpoint reset signal line
> >  			- "wake-gpios"	PCIe endpoint wake signal line
> >
> > +- phy-tx0-term-offset:
> 
> Needs a vendor prefix.
> 

So I should change to qcom,phy-tx0-term-offset  right?

> > +	Usage: optional
> > +	Value type: <u32>
> > +	Definition: If not defined is 0. In ipq806x is set to 7. In newer
> > +				revision (v2.0) the offset is zero.
> > +
> >  * Example for ipq/apq8064
> >  	pcie@1b500000 {
> >  		compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064",
> "snps,dw-pcie";
> > @@ -293,6 +299,7 @@
> >  		reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
> >  		pinctrl-0 = <&pcie_pins_default>;
> >  		pinctrl-names = "default";
> > +		phy-tx0-term-offset = <7>;
> >  	};
> >
> >  * Example for apq8084
> > --
> > 2.25.1
> >





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux