[DPU PATCH v5 2/5] drm: add constant N value in helper file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Chandan Uddaraju <chandanu@xxxxxxxxxxxxxx>

The constant N value (0x8000) is used by multiple DP
drivers. Define this value in header file and use this
in the existing i915 display driver.

Signed-off-by: Chandan Uddaraju <chandanu@xxxxxxxxxxxxxx>
Signed-off-by: Vara Reddy <varar@xxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/display/intel_display.c | 2 +-
 include/drm/drm_dp_helper.h                  | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index effc425..3c016f3 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -7618,7 +7618,7 @@ static void compute_m_n(unsigned int m, unsigned int n,
 	 * which the devices expect also in synchronous clock mode.
 	 */
 	if (constant_n)
-		*ret_n = 0x8000;
+		*ret_n = DP_LINK_CONSTANT_N_VALUE;
 	else
 		*ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
 
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 51ecb51..b509e74 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -1455,6 +1455,8 @@ static inline ssize_t drm_dp_dpcd_writeb(struct drm_dp_aux *aux,
 int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux,
 				 u8 status[DP_LINK_STATUS_SIZE]);
 
+#define DP_LINK_CONSTANT_N_VALUE 0x8000
+
 int drm_dp_downstream_max_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
 				const u8 port_cap[4]);
 int drm_dp_downstream_max_bpc(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
-- 
1.9.1



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux