Hi Akash,
On Tue, Mar 31, 2020 at 04:39:32PM +0530, Akash Asthana wrote:
> Get the interconnect paths for I2C based Serial Engine device
> and vote according to the bus speed of the driver.
>
> Signed-off-by: Akash Asthana <akashast@xxxxxxxxxxxxxx>
> ---
> Changes in V2:
> - As per Bjorn's comment, removed se == NULL check from geni_i2c_icc_get
> - As per Bjorn's comment, removed code to set se->icc_path* to NULL in failure
> - As per Bjorn's comment, introduced and using devm_of_icc_get API for getting
> path handle
> - As per Matthias comment, added error handling for icc_set_bw call
>
> Changes in V3:
> - As per Matthias comment, use common library APIs defined in geni-se
> driver for ICC functionality.
>
> drivers/i2c/busses/i2c-qcom-geni.c | 30 +++++++++++++++++++++++++++++-
> 1 file changed, 29 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
> index 18d1e4f..373c2ca 100644
> --- a/drivers/i2c/busses/i2c-qcom-geni.c
> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
> @@ -557,6 +557,26 @@ static int geni_i2c_probe(struct platform_device *pdev)
> gi2c->adap.dev.of_node = dev->of_node;
> strlcpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));
>
> + ret = geni_icc_get(&gi2c->se, "qup-core", "qup-config", "qup-memory");
> + if (ret)
> + return ret;
> + /*
> + * Set the bus quota for core and cpu to a reasonable value for
> + * register access.
> + * Set quota for DDR based on bus speed, assume peak requirement
> + * as twice of avg bw.
> + */
> + gi2c->se.to_core.avg_bw = GENI_DEFAULT_BW;
> + gi2c->se.to_core.peak_bw = Bps_to_icc(CORE_2X_100_MHZ);
> + gi2c->se.from_cpu.avg_bw = GENI_DEFAULT_BW;
> + gi2c->se.from_cpu.peak_bw = GENI_DEFAULT_BW;
> + gi2c->se.to_ddr.avg_bw = Bps_to_icc(gi2c->clk_freq_out);
> + gi2c->se.to_ddr.peak_bw = Bps_to_icc(2 * gi2c->clk_freq_out);
> +
> + ret = geni_icc_vote_on(&gi2c->se);
> + if (ret)
> + return ret;
> +
> ret = geni_se_resources_on(&gi2c->se);
> if (ret) {
> dev_err(dev, "Error turning on resources %d\n", ret);
I think you need to call geni_icc_vote_off() here and in other error paths.
