Add device node for the ath10k SNOC platform driver probe and add resources required for WCN3990 on sc7180 soc. Signed-off-by: Rakesh Pillai <pillair@xxxxxxxxxxxxxx> --- Depends on https://patchwork.kernel.org/patch/11455345/ The above patch adds the dt-bindings for wifi-firmware subnode Changes from v7: - Correct the wlan_fw_mem start address --- arch/arm64/boot/dts/qcom/sc7180-idp.dts | 8 ++++++++ arch/arm64/boot/dts/qcom/sc7180.dtsi | 27 +++++++++++++++++++++++++++ 2 files changed, 35 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 043c9b9..a6168a4 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -327,6 +327,14 @@ }; }; +&wifi { + status = "okay"; + qcom,msa-fixed-perm; + wifi-firmware { + iommus = <&apps_smmu 0xc2 0x1>; + }; +}; + /* PINCTRL - additions to nodes defined in sc7180.dtsi */ &qspi_clk { diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 998f101..c03b6a7 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -83,6 +83,11 @@ reg = <0 0x8f600000 0 0x500000>; no-map; }; + + wlan_fw_mem: memory@94100000 { + reg = <0 0x94100000 0 0x200000>; + no-map; + }; }; cpus { @@ -835,6 +840,28 @@ }; }; + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + iommus = <&apps_smmu 0xc0 0x1>; + interrupts = + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>; + memory-region = <&wlan_fw_mem>; + status = "disabled"; + }; + config_noc: interconnect@1500000 { compatible = "qcom,sc7180-config-noc"; reg = <0 0x01500000 0 0x28000>; -- 2.7.4
