Re: [PATCH v10 0/2] Add support for rm69299 Visionox panel driver and add devicetree bindings for visionox panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Matthias.

On Sun, Mar 29, 2020 at 10:44:17AM -0700, Matthias Kaehlcke wrote:
> Hi Sam,
> 
> On Sat, Mar 28, 2020 at 09:40:47PM +0100, Sam Ravnborg wrote:
> > Hi Harigovindan
> > 
> > On Fri, Mar 27, 2020 at 01:06:34PM +0530, Harigovindan P wrote:
> > > Adding support for visionox rm69299 panel driver and adding bindings for the same panel.
> > > 
> > > Harigovindan P (2):
> > >   dt-bindings: display: add visionox rm69299 panel variant
> > >   drm/panel: add support for rm69299 visionox panel driver
> > 
> > I have only the first patch, which is now applied.
> > Please resend second patch as it is lost somewhere.
> 
> Yes, it seems for v8, v9 and v10 only the bindings were sent, even
> though the cover letter and subject say it's a series of two patches.
> 
> To my knowledge the latest version of the driver patch is this:
> 
> https://patchwork.kernel.org/patch/11439689/

I did not go back and check, but I recall there was
review feedback that is not yet addressed.

I applied the patch here and checkpatch was not happy:
total: 14 errors, 22 warnings, 11 checks, 314 lines checked

Many of these are trivial indent or spaces used where tabs should be
used.
These needs to be fixed before the driver will be applied.

And there was too much that I just did it while applying.

	Sam



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux