The thermal trip points have unit name but no reg property, so we can
remove them. It also fixes the following warnings from 'make dtbs_check'
after adding the thermal yaml bindings.
arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
gpu-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
modem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
gpu-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
modem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 9f31064f2374e..1a6e28923a45d 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -261,7 +261,7 @@
thermal-sensors = <&tsens 4>;
trips {
- cpu2_3_alert0: trip-point@0 {
+ cpu2_3_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
@@ -291,7 +291,7 @@
thermal-sensors = <&tsens 2>;
trips {
- gpu_alert0: trip-point@0 {
+ gpu_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
@@ -311,7 +311,7 @@
thermal-sensors = <&tsens 1>;
trips {
- cam_alert0: trip-point@0 {
+ cam_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "hot";
@@ -326,7 +326,7 @@
thermal-sensors = <&tsens 0>;
trips {
- modem_alert0: trip-point@0 {
+ modem_alert0: trip-point0 {
temperature = <85000>;
hysteresis = <2000>;
type = "hot";
--
2.20.1
