[PATCH 2/2] dt-bindings: thermal: tsens: Set 'additionalProperties: false'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ensure the node only contains the properties listed in the schema by
setting 'additionalProperties: false'. Doing this requires reworking the
interrupt properties schemas so that they are defined in the main
'properties' section.

Fixes: a877e768f655 ("dt-bindings: thermal: tsens: Convert over to a yaml schema")
Cc: Andy Gross <agross@xxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
Cc: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Cc: linux-arm-msm@xxxxxxxxxxxxxxx
Cc: linux-pm@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
 .../bindings/thermal/qcom-tsens.yaml          | 28 ++++++++++++-------
 1 file changed, 18 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 7a38d2116059..3492447e42e9 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -46,6 +46,18 @@ properties:
       - description: TM registers
       - description: SROT registers
 
+  interrupts:
+    minItems: 1
+    items:
+      - description: Combined interrupt if upper or lower threshold crossed
+      - description: Interrupt if critical threshold crossed
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: uplow
+      - const: critical
+
   nvmem-cells:
     minItems: 1
     maxItems: 2
@@ -88,22 +100,16 @@ allOf:
     then:
       properties:
         interrupts:
-          items:
-            - description: Combined interrupt if upper or lower threshold crossed
+          maxItems: 1
         interrupt-names:
-          items:
-            - const: uplow
+          maxItems: 1
 
     else:
       properties:
         interrupts:
-          items:
-            - description: Combined interrupt if upper or lower threshold crossed
-            - description: Interrupt if critical threshold crossed
+          minItems: 2
         interrupt-names:
-          items:
-            - const: uplow
-            - const: critical
+          minItems: 2
 
 required:
   - compatible
@@ -113,6 +119,8 @@ required:
   - interrupt-names
   - "#thermal-sensor-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-- 
2.20.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux