Re: [PATCH v1 1/2] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



在 2020-03-16 23:04,bgodavar@xxxxxxxxxxxxxx 写道:
On 2020-03-14 15:13, Rocky Liao wrote:
This patch adds support for QCA6390, including the devicetree and acpi
compatible hwid matching, and patch/nvm downloading.

Signed-off-by: Rocky Liao <rjliao@xxxxxxxxxxxxxx>
---
 drivers/bluetooth/btqca.c   | 44 +++++++++++++++++++++++++++++++----
 drivers/bluetooth/btqca.h   |  8 +++++++
drivers/bluetooth/hci_qca.c | 46 +++++++++++++++++++++++++++++++------
 3 files changed, 86 insertions(+), 12 deletions(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index a16845c0751d..ca126e499c58 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -14,6 +14,9 @@

 #define VERSION "0.1"

+#define QCA_IS_3991_6390(soc_type)    \
+	(soc_type == QCA_WCN3991 || soc_type == QCA_QCA6390)
+

[Bala]: Why don't we do >= QCA_WCN3991 (mostly both the devices
support same features)

OK

 int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
 			 enum qca_btsoc_type soc_type)
 {
@@ -32,7 +35,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
*soc_version,
 	 * VSE event. WCN3991 sends version command response as a payload to
 	 * command complete event.
 	 */
-	if (soc_type == QCA_WCN3991) {
+	if (QCA_IS_3991_6390(soc_type)) {
 		event_type = 0;
 		rlen += 1;
 		rtype = EDL_PATCH_VER_REQ_CMD;
@@ -69,7 +72,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
*soc_version,
 		goto out;
 	}

-	if (soc_type == QCA_WCN3991)
+	if (QCA_IS_3991_6390(soc_type))
 		memmove(&edl->data, &edl->data[1], sizeof(*ver));

 	ver = (struct qca_btsoc_version *)(edl->data);
@@ -138,6 +141,29 @@ int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
 }
 EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);

+int qca_send_enhancelog_enable_cmd(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	int err;
+	const u8 param[2] = {0x14, 0x01};

[Bala]: advisable to use MACRO's

This func will be removed, we don't need to enable enhanced log by default. It can be done by hcitool whenever needed.
+
+	bt_dev_dbg(hdev, "QCA enhanced log enable cmd");
+
+	skb = __hci_cmd_sync_ev(hdev, QCA_ENHANCED_LOG_ENABLE_CMD, 2,
+				param, HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
+
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "Enhanced log enable cmd failed (%d)", err);
+		return err;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qca_send_enhancelog_enable_cmd);
+
 static void qca_tlv_check_data(struct qca_fw_config *config,
 		const struct firmware *fw, enum qca_btsoc_type soc_type)
 {
@@ -217,7 +243,7 @@ static void qca_tlv_check_data(struct qca_fw_config *config,
 				tlv_nvm->data[0] |= 0x80;

 				/* UART Baud Rate */
-				if (soc_type == QCA_WCN3991)
+				if (QCA_IS_3991_6390(soc_type))
 					tlv_nvm->data[1] = nvm_baud_rate;
 				else
 					tlv_nvm->data[2] = nvm_baud_rate;
@@ -268,7 +294,7 @@ static int qca_tlv_send_segment(struct hci_dev
*hdev, int seg_size,
 	 * VSE event. WCN3991 sends version command response as a payload to
 	 * command complete event.
 	 */
-	if (soc_type == QCA_WCN3991) {
+	if (QCA_IS_3991_6390(soc_type)) {
 		event_type = 0;
 		rlen = sizeof(*edl);
 		rtype = EDL_PATCH_TLV_REQ_CMD;
@@ -301,7 +327,7 @@ static int qca_tlv_send_segment(struct hci_dev
*hdev, int seg_size,
 		err = -EIO;
 	}

-	if (soc_type == QCA_WCN3991)
+	if (QCA_IS_3991_6390(soc_type))
 		goto out;

 	tlv_resp = (struct tlv_seg_resp *)(edl->data);
@@ -442,6 +468,11 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 			    (soc_ver & 0x0000000f);
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/crbtfw%02x.tlv", rom_ver);
+	} else if (soc_type == QCA_QCA6390) {
+		rom_ver = ((soc_ver & 0x00000f00) >> 0x04) |
+			    (soc_ver & 0x0000000f);
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/htbtfw%02x.tlv", rom_ver);

[Bala]: This part we need to rethink to having to optimize.

ROME use: rampatch<>.tlv
WCN399x: uses cr<>.tlv
QCA6390: uses ht
tomorrow if some new chipset comes, it uses different name again a we
need to handle this part.
i would suggest add this prefix to  "qca_bluetooth_of_match"
which can be passed as argument

I would like to do this in a separate patch.
 	} else {
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/rampatch_%08x.bin", soc_ver);
@@ -464,6 +495,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	else if (qca_is_wcn399x(soc_type))
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/crnv%02x.bin", rom_ver);
+	else if (soc_type == QCA_QCA6390)
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/htnv%02x.bin", rom_ver);
 	else
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/nvm_%08x.bin", soc_ver);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index e16a4d650597..bc703817c3d7 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -14,6 +14,7 @@
 #define EDL_NVM_ACCESS_SET_REQ_CMD	(0x01)
 #define MAX_SIZE_PER_TLV_SEGMENT	(243)
 #define QCA_PRE_SHUTDOWN_CMD		(0xFC08)
+#define QCA_ENHANCED_LOG_ENABLE_CMD     (0xFC17)

 #define EDL_CMD_REQ_RES_EVT		(0x00)
 #define EDL_PATCH_VER_RES_EVT		(0x19)
@@ -127,6 +128,7 @@ enum qca_btsoc_type {
 	QCA_WCN3990,
 	QCA_WCN3991,
 	QCA_WCN3998,
+	QCA_QCA6390,
 };

 #if IS_ENABLED(CONFIG_BT_QCA)
@@ -139,6 +141,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
*soc_version,
 			 enum qca_btsoc_type);
 int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 int qca_send_pre_shutdown_cmd(struct hci_dev *hdev);
+int qca_send_enhancelog_enable_cmd(struct hci_dev *hdev);
 static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
 {
 	return soc_type == QCA_WCN3990 || soc_type == QCA_WCN3991 ||
@@ -178,4 +181,9 @@ static inline int qca_send_pre_shutdown_cmd(struct
hci_dev *hdev)
 {
 	return -EOPNOTSUPP;
 }
+
+static inline int qca_send_enhancelog_enable_cmd(struct hci_dev *hdev)
+{
+	return -EOPNOTSUPP;
+}
 #endif
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 439392b1c043..0176264b0828 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -26,6 +26,7 @@
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/acpi.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/serdev.h>
@@ -1596,7 +1597,7 @@ static int qca_setup(struct hci_uart *hu)
 	set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);

 	bt_dev_info(hdev, "setting up %s",
-		qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME");
+		qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME/QCA6390");

 retry:
 	ret = qca_power_on(hdev);
@@ -1639,6 +1640,12 @@ static int qca_setup(struct hci_uart *hu)
 		qca_debugfs_init(hdev);
 		hu->hdev->hw_error = qca_hw_error;
 		hu->hdev->cmd_timeout = qca_cmd_timeout;
+
+		/* QCA6390 FW doesn't enable enhanced log by default
+		 * need to send VSC to enable it
+		 */
+		if (soc_type == QCA_QCA6390)
+			qca_send_enhancelog_enable_cmd(hdev);
 	} else if (ret == -ENOENT) {
 		/* No patch/nvm-config found, run with original fw/config */
 		ret = 0;
@@ -1665,10 +1672,10 @@ static int qca_setup(struct hci_uart *hu)
 	}

 	/* Setup bdaddr */
-	if (qca_is_wcn399x(soc_type))
-		hu->hdev->set_bdaddr = qca_set_bdaddr;
-	else
+	if (soc_type == QCA_ROME)
 		hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
+	else
+		hu->hdev->set_bdaddr = qca_set_bdaddr;

 	return ret;
 }
@@ -1721,6 +1728,11 @@ static const struct qca_vreg_data
qca_soc_data_wcn3998 = {
 	.num_vregs = 4,
 };

+static const struct qca_vreg_data qca_soc_data_qca6390 = {
+	.soc_type = QCA_QCA6390,
+	.num_vregs = 0,
+};
+
 static void qca_power_shutdown(struct hci_uart *hu)
 {
 	struct qca_serdev *qcadev;
@@ -1764,7 +1776,7 @@ static int qca_power_off(struct hci_dev *hdev)
 	enum qca_btsoc_type soc_type = qca_soc_type(hu);

 	/* Stop sending shutdown command if soc crashes. */
-	if (qca_is_wcn399x(soc_type)
+	if (soc_type != QCA_ROME
 		&& qca->memdump_state == QCA_MEMDUMP_IDLE) {
 		qca_send_pre_shutdown_cmd(hdev);
 		usleep_range(8000, 10000);
@@ -1900,7 +1912,11 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 			return err;
 		}
 	} else {
-		qcadev->btsoc_type = QCA_ROME;
+		if (data)
+			qcadev->btsoc_type = data->soc_type;
+		else
+			qcadev->btsoc_type = QCA_ROME;
+
 		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
 					       GPIOD_OUT_LOW);
 		if (!qcadev->bt_en) {
@@ -2044,21 +2060,37 @@ static int __maybe_unused qca_resume(struct device *dev)

 static SIMPLE_DEV_PM_OPS(qca_pm_ops, qca_suspend, qca_resume);

+#ifdef CONFIG_OF
 static const struct of_device_id qca_bluetooth_of_match[] = {
 	{ .compatible = "qcom,qca6174-bt" },
+	{ .compatible = "qcom,qca6390-bt", .data = &qca_soc_data_qca6390},
 	{ .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
 	{ .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
 	{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id qca_bluetooth_acpi_match[] = {
+	{ "QCOM6390", (kernel_ulong_t)&qca_soc_data_qca6390 },
+	{ "DLA16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
+	{ "DLB16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
+	{ "DLB26390", (kernel_ulong_t)&qca_soc_data_qca6390 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, qca_bluetooth_acpi_match);
+#endif
+

 static struct serdev_device_driver qca_serdev_driver = {
 	.probe = qca_serdev_probe,
 	.remove = qca_serdev_remove,
 	.driver = {
 		.name = "hci_uart_qca",
-		.of_match_table = qca_bluetooth_of_match,
+		.of_match_table = of_match_ptr(qca_bluetooth_of_match),
+		.acpi_match_table = ACPI_PTR(qca_bluetooth_acpi_match),
 		.pm = &qca_pm_ops,
 	},
 };



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux