[v3] arm64: dts: sc7180: modify assigned clocks for sc7180 target

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add DISP_CC_MDSS_ROT_CLK and DISP_CC_MDSS_AHB_CLK
in the assigned clocks list as these are display
specific clocks and needs to be initialized from
the client side. Adding the default rate of
19.2 mhz for these clocks for sc7180 target.

Signed-off-by: Krishna Manikandan <mkrishn@xxxxxxxxxxxxxx>

Changes in v3:
	- Change in commit message
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 998f101..e3b60f1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1544,8 +1544,12 @@
 				clock-names = "iface", "rot", "lut", "core",
 					      "vsync";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
-						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+						  <&dispcc DISP_CC_MDSS_ROT_CLK>,
+						  <&dispcc DISP_CC_MDSS_AHB_CLK>;
 				assigned-clock-rates = <300000000>,
+						       <19200000>,
+						       <19200000>,
 						       <19200000>;
 
 				interrupt-parent = <&mdss>;
-- 
1.9.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux