[v2 0/6] Qualcomm CCI & Camera for db410c & db845c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series depends on the Qualcom CCI I2C driver series:
https://patchwork.kernel.org/cover/10569957/

This series enables basic camera functionality on the Qualcomm db410c and
db845c (RB3) platforms.

This includes building drivers as modules, adding devicetree nodes
for camera controllers, clocks, regulators and sensor nodes.

Loic Poulain (2):
  arm64: dts: msm8916: Add i2c-qcom-cci node
  arm64: dts: apq8016-sbc: Add CCI/Sensor nodes

Robert Foss (4):
  arm64: dts: sdm845: Add i2c-qcom-cci node
  arm64: dts: sdm845-db845c: Add pm_8998 gpio names
  arm64: dts: sdm845-db845c: Add ov8856 & ov7251 camera nodes
  arm64: defconfig: Enable QCOM CAMCC, CAMSS and CCI drivers

 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi  |  76 ++++++++
 arch/arm64/boot/dts/qcom/msm8916.dtsi      |  27 +++
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 210 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sdm845.dtsi       |  92 +++++++++
 arch/arm64/configs/defconfig               |   4 +
 5 files changed, 409 insertions(+)

-- 
2.20.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux