[PATCH 0/5] Enable Qualcomm QCS 404 HS/SS USB PHYs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This set of patches does the following:

- Removes unused Qualcomm USB PHY bindings
- Adds new USB PHY bindings for QCS404
- Adds new USB PHY drivers for QCS404

These patches have been through seven review cycles already and have a
number of Review-by and Ack-by. For the pusposes of making it easier to
merge this set focuses on the PHY stuff in isolation.

The last set for can be found here:
https://lkml.org/lkml/2020/3/3/807

Jorge Ramirez-Ortiz (3):
  dt-bindings: phy: remove qcom-dwc3-usb-phy
  dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings
  phy: qualcomm: usb: Add SuperSpeed PHY driver

Shawn Guo (1):
  phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver

Sriharsha Allenki (1):
  dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding

 .../bindings/phy/qcom,usb-hs-28nm.yaml        |  90 ++++
 .../devicetree/bindings/phy/qcom,usb-ss.yaml  |  83 ++++
 .../bindings/phy/qcom-dwc3-usb-phy.txt        |  37 --
 drivers/phy/qualcomm/Kconfig                  |  20 +
 drivers/phy/qualcomm/Makefile                 |   2 +
 drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c   | 415 ++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-usb-ss.c        | 246 +++++++++++
 7 files changed, 856 insertions(+), 37 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml
 delete mode 100644 Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
 create mode 100644 drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
 create mode 100644 drivers/phy/qualcomm/phy-qcom-usb-ss.c

-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux