Re: [PATCH v1] Bluetooth: hci_qca: Replace devm_gpiod_get() with devm_gpiod_get_optional()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Mar 04, 2020 at 09:16:45PM +0800, Rocky Liao wrote:
> This patch replaces devm_gpiod_get() with devm_gpiod_get_optional() to get
> bt_en and replaces devm_clk_get() with devm_clk_get_optional() to get
> susclk. It also uses NULL check to determine whether the resource is
> available or not.
> 
> Fixes: 8a208b24d770 ("Bluetooth: hci_qca: Make bt_en and susclk not mandatory for QCA Rome")
> Signed-off-by: Rocky Liao <rjliao@xxxxxxxxxxxxxx>
> ---
>  drivers/bluetooth/hci_qca.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)

> @@ -1901,15 +1901,15 @@ static int qca_serdev_probe(struct serdev_device *serdev)
>  		}
>  	} else {
>  		qcadev->btsoc_type = QCA_ROME;
> -		qcadev->bt_en = devm_gpiod_get(&serdev->dev, "enable",
> +		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
>  					       GPIOD_OUT_LOW);
> -		if (IS_ERR(qcadev->bt_en)) {
> +		if (!qcadev->bt_en) {
>  			dev_warn(&serdev->dev, "failed to acquire enable gpio\n");

Shouldn't this be dev_dbg() if the gpio is indeed optional?

>  			power_ctrl_enabled = false;
>  		}
>  
> -		qcadev->susclk = devm_clk_get(&serdev->dev, NULL);
> -		if (IS_ERR(qcadev->susclk)) {
> +		qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
> +		if (!qcadev->susclk) {
>  			dev_warn(&serdev->dev, "failed to acquire clk\n");

Same here.

>  		} else {
>  			err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
> @@ -1924,7 +1924,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
>  		err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
>  		if (err) {
>  			BT_ERR("Rome serdev registration failed");
> -			if (!IS_ERR(qcadev->susclk))
> +			if (qcadev->susclk)
>  				clk_disable_unprepare(qcadev->susclk);

The clock framework allows you to pass in NULL precisely to be able to
handle optional resources without sprinkling conditionals all over (the
gpio subsystem does not however).

Applies to clk_set_rate() etc. above as well.

>  			return err;
>  		}
> @@ -1945,7 +1945,7 @@ static void qca_serdev_remove(struct serdev_device *serdev)
>  
>  	if (qca_is_wcn399x(qcadev->btsoc_type))
>  		qca_power_shutdown(&qcadev->serdev_hu);
> -	else if (!IS_ERR(qcadev->susclk))
> +	else if (qcadev->susclk)
>  		clk_disable_unprepare(qcadev->susclk);

Same here.

>  	hci_uart_unregister_device(&qcadev->serdev_hu);

Johan



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux