Add a simple-mfd representing IMEM on SDM845 and define the PIL relocation info region, so that post mortem tools will be able to locate the loaded remoteprocs. Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> --- Changes since v3: - Added ranges - Made size in reg hex arch/arm64/boot/dts/qcom/sdm845.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 061f49faab19..36ed6d8d0863 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3254,6 +3254,21 @@ spmi_bus: spmi@c440000 { cell-index = <0>; }; + imem@146bf000 { + compatible = "syscon", "simple-mfd"; + reg = <0 0x146bf000 0 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x146bf000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sdm845-smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x80000>; -- 2.24.0