Re: [PATCH 1/1] arm64: dts: qcom: sc7180: Added critical trip point Thermal-zones node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed 04 Mar 04:23 PST 2020, Rajeshwari wrote:

> To enable kernel critical shutdown feature added critical trip point to

s/added/add/
s/point/points/

> all non CPU sensors to perform shutdown in orderly manner.
> 
> Signed-off-by: Rajeshwari <rkambl@xxxxxxxxxxxxxx>
> ---

No need to provide a cover-letter for a single patch.

>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 78 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 78 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index b8a72cf..7e5f14f 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -1956,6 +1956,12 @@
>  					hysteresis = <2000>;
>  					type = "hot";
>  				};
> +
> +				aoss0_crit: aoss0_crit {
> +                                        temperature = <110000>;
> +                                        hysteresis = <2000>;
> +                                        type = "critical";
> +                                };

The indentation of all but the initial line is off. Same with below
hunks as well. Please correct this.

Regards,
Bjorn



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux