From: David Dai <daidavid1@xxxxxxxxxxxxxx> Add bcm voter driver and add support for RPMh specific interconnect providers which implements the set and aggregate functionalities that translates bandwidth requests into RPMh messages. These modules provide a common set of functionalities for all Qualcomm RPMh based interconnect providers and should help reduce code duplication when adding new providers. Reviewed-by: Evan Green <evgreen@xxxxxxxxxxxx> Signed-off-by: David Dai <daidavid1@xxxxxxxxxxxxxx> Signed-off-by: Odelu Kukatla <okukatla@xxxxxxxxxxxxxx> Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx> --- Changes since v3: * Address Georgi's review comments * Picked up Evan's R-b V3: https://patchwork.kernel.org/cover/11372211/ drivers/interconnect/qcom/Kconfig | 8 + drivers/interconnect/qcom/Makefile | 4 + drivers/interconnect/qcom/bcm-voter.c | 366 ++++++++++++++++++++++++++ drivers/interconnect/qcom/bcm-voter.h | 27 ++ drivers/interconnect/qcom/icc-rpmh.c | 150 +++++++++++ drivers/interconnect/qcom/icc-rpmh.h | 149 +++++++++++ 6 files changed, 704 insertions(+) create mode 100644 drivers/interconnect/qcom/bcm-voter.c create mode 100644 drivers/interconnect/qcom/bcm-voter.h create mode 100644 drivers/interconnect/qcom/icc-rpmh.c create mode 100644 drivers/interconnect/qcom/icc-rpmh.h diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig index 76938ece1658e..87c926897e786 100644 --- a/drivers/interconnect/qcom/Kconfig +++ b/drivers/interconnect/qcom/Kconfig @@ -5,6 +5,9 @@ config INTERCONNECT_QCOM help Support for Qualcomm's Network-on-Chip interconnect hardware. +config INTERCONNECT_QCOM_BCM_VOTER + tristate + config INTERCONNECT_QCOM_MSM8916 tristate "Qualcomm MSM8916 interconnect driver" depends on INTERCONNECT_QCOM @@ -32,10 +35,15 @@ config INTERCONNECT_QCOM_QCS404 This is a driver for the Qualcomm Network-on-Chip on qcs404-based platforms. +config INTERCONNECT_QCOM_RPMH + tristate + config INTERCONNECT_QCOM_SDM845 tristate "Qualcomm SDM845 interconnect driver" depends on INTERCONNECT_QCOM depends on (QCOM_RPMH && QCOM_COMMAND_DB && OF) || COMPILE_TEST + select INTERCONNECT_QCOM_RPMH + select INTERCONNECT_QCOM_BCM_VOTER help This is a driver for the Qualcomm Network-on-Chip on sdm845-based platforms. diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile index e8271575e3d8a..d591bb56273b1 100644 --- a/drivers/interconnect/qcom/Makefile +++ b/drivers/interconnect/qcom/Makefile @@ -1,13 +1,17 @@ # SPDX-License-Identifier: GPL-2.0 +icc-bcm-voter-objs := bcm-voter.o qnoc-msm8916-objs := msm8916.o qnoc-msm8974-objs := msm8974.o qnoc-qcs404-objs := qcs404.o +icc-rpmh-obj := icc-rpmh.o qnoc-sdm845-objs := sdm845.o icc-smd-rpm-objs := smd-rpm.o +obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) += icc-bcm-voter.o obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += qnoc-msm8916.o obj-$(CONFIG_INTERCONNECT_QCOM_MSM8974) += qnoc-msm8974.o obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o +obj-$(CONFIG_INTERCONNECT_QCOM_RPMH) += icc-rpmh.o obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o diff --git a/drivers/interconnect/qcom/bcm-voter.c b/drivers/interconnect/qcom/bcm-voter.c new file mode 100644 index 0000000000000..2adfde8cdf19d --- /dev/null +++ b/drivers/interconnect/qcom/bcm-voter.c @@ -0,0 +1,366 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include <asm/div64.h> +#include <linux/interconnect-provider.h> +#include <linux/list_sort.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +#include <soc/qcom/rpmh.h> +#include <soc/qcom/tcs.h> + +#include "bcm-voter.h" +#include "icc-rpmh.h" + +static LIST_HEAD(bcm_voters); +static DEFINE_MUTEX(bcm_voter_lock); + +/** + * struct bcm_voter - Bus Clock Manager voter + * @dev: reference to the device that communicates with the BCM + * @np: reference to the device node to match bcm voters + * @lock: mutex to protect commit and wake/sleep lists in the voter + * @commit_list: list containing bcms to be committed to hardware + * @ws_list: list containing bcms that have different wake/sleep votes + * @voter_node: list of bcm voters + */ +struct bcm_voter { + struct device *dev; + struct device_node *np; + struct mutex lock; + struct list_head commit_list; + struct list_head ws_list; + struct list_head voter_node; +}; + +static int cmp_vcd(void *priv, struct list_head *a, struct list_head *b) +{ + const struct qcom_icc_bcm *bcm_a = + list_entry(a, struct qcom_icc_bcm, list); + const struct qcom_icc_bcm *bcm_b = + list_entry(b, struct qcom_icc_bcm, list); + + if (bcm_a->aux_data.vcd < bcm_b->aux_data.vcd) + return -1; + else if (bcm_a->aux_data.vcd == bcm_b->aux_data.vcd) + return 0; + else + return 1; +} + +static void bcm_aggregate(struct qcom_icc_bcm *bcm) +{ + size_t i, bucket; + u64 agg_avg[QCOM_ICC_NUM_BUCKETS] = {0}; + u64 agg_peak[QCOM_ICC_NUM_BUCKETS] = {0}; + u64 temp; + + for (bucket = 0; bucket < QCOM_ICC_NUM_BUCKETS; bucket++) { + for (i = 0; i < bcm->num_nodes; i++) { + temp = bcm->nodes[i]->sum_avg[bucket] * bcm->aux_data.width; + do_div(temp, bcm->nodes[i]->buswidth * bcm->nodes[i]->channels); + agg_avg[bucket] = max(agg_avg[bucket], temp); + + temp = bcm->nodes[i]->max_peak[bucket] * bcm->aux_data.width; + do_div(temp, bcm->nodes[i]->buswidth); + agg_peak[bucket] = max(agg_peak[bucket], temp); + } + + temp = agg_avg[bucket] * 1000ULL; + do_div(temp, bcm->aux_data.unit); + bcm->vote_x[bucket] = temp; + + temp = agg_peak[bucket] * 1000ULL; + do_div(temp, bcm->aux_data.unit); + bcm->vote_y[bucket] = temp; + } + + if (bcm->keepalive && bcm->vote_x[QCOM_ICC_BUCKET_AMC] == 0 && + bcm->vote_y[QCOM_ICC_BUCKET_AMC] == 0) { + bcm->vote_x[QCOM_ICC_BUCKET_AMC] = 1; + bcm->vote_x[QCOM_ICC_BUCKET_WAKE] = 1; + bcm->vote_y[QCOM_ICC_BUCKET_AMC] = 1; + bcm->vote_y[QCOM_ICC_BUCKET_WAKE] = 1; + } +} + +static inline void tcs_cmd_gen(struct tcs_cmd *cmd, u64 vote_x, u64 vote_y, + u32 addr, bool commit) +{ + bool valid = true; + + if (!cmd) + return; + + if (vote_x == 0 && vote_y == 0) + valid = false; + + if (vote_x > BCM_TCS_CMD_VOTE_MASK) + vote_x = BCM_TCS_CMD_VOTE_MASK; + + if (vote_y > BCM_TCS_CMD_VOTE_MASK) + vote_y = BCM_TCS_CMD_VOTE_MASK; + + cmd->addr = addr; + cmd->data = BCM_TCS_CMD(commit, valid, vote_x, vote_y); + + /* + * Set the wait for completion flag on command that need to be completed + * before the next command. + */ + if (commit) + cmd->wait = true; +} + +static void tcs_list_gen(struct list_head *bcm_list, int bucket, + struct tcs_cmd tcs_list[MAX_BCMS], + int n[MAX_VCD + 1]) +{ + struct qcom_icc_bcm *bcm; + bool commit; + size_t idx = 0, batch = 0, cur_vcd_size = 0; + + memset(n, 0, sizeof(int) * (MAX_VCD + 1)); + + list_for_each_entry(bcm, bcm_list, list) { + commit = false; + cur_vcd_size++; + if ((list_is_last(&bcm->list, bcm_list)) || + bcm->aux_data.vcd != list_next_entry(bcm, list)->aux_data.vcd) { + commit = true; + cur_vcd_size = 0; + } + tcs_cmd_gen(&tcs_list[idx], bcm->vote_x[bucket], + bcm->vote_y[bucket], bcm->addr, commit); + idx++; + n[batch]++; + /* + * Batch the BCMs in such a way that we do not split them in + * multiple payloads when they are under the same VCD. This is + * to ensure that every BCM is committed since we only set the + * commit bit on the last BCM request of every VCD. + */ + if (n[batch] >= MAX_RPMH_PAYLOAD) { + if (!commit) { + n[batch] -= cur_vcd_size; + n[batch + 1] = cur_vcd_size; + } + batch++; + } + } +} + +/** + * of_bcm_voter_get - gets a bcm voter handle from DT node + * @dev: device pointer for the consumer device + * @name: name for the bcm voter device + * + * This function will match a device_node pointer for the phandle + * specified in the device DT and return a bcm_voter handle on success. + * + * Returns bcm_voter pointer or ERR_PTR() on error. EPROBE_DEFER is returned + * when matching bcm voter is yet to be found. + */ +struct bcm_voter *of_bcm_voter_get(struct device *dev, const char *name) +{ + struct bcm_voter *voter = ERR_PTR(-EPROBE_DEFER); + struct bcm_voter *temp; + struct device_node *np, *node; + int idx = 0; + + if (!dev || !dev->of_node) + return ERR_PTR(-ENODEV); + + np = dev->of_node; + + if (name) { + idx = of_property_match_string(np, "qcom,bcm-voter-names", name); + if (idx < 0) + return ERR_PTR(idx); + } + + node = of_parse_phandle(np, "qcom,bcm-voters", idx); + + mutex_lock(&bcm_voter_lock); + list_for_each_entry(temp, &bcm_voters, voter_node) { + if (temp->np == node) { + voter = temp; + break; + } + } + mutex_unlock(&bcm_voter_lock); + + return voter; +} +EXPORT_SYMBOL_GPL(of_bcm_voter_get); + +/** + * qcom_icc_bcm_voter_add - queues up the bcm nodes that require updates + * @voter: voter that the bcms are being added to + * @bcm: bcm to add to the commit and wake sleep list + */ +void qcom_icc_bcm_voter_add(struct bcm_voter *voter, struct qcom_icc_bcm *bcm) +{ + if (!voter) + return; + + mutex_lock(&voter->lock); + if (list_empty(&bcm->list)) + list_add_tail(&bcm->list, &voter->commit_list); + + if (list_empty(&bcm->ws_list)) + list_add_tail(&bcm->ws_list, &voter->ws_list); + + mutex_unlock(&voter->lock); +} +EXPORT_SYMBOL_GPL(qcom_icc_bcm_voter_add); + +/** + * qcom_icc_bcm_voter_commit - generates and commits tcs cmds based on bcms + * @voter: voter that needs flushing + * + * This function generates a set of AMC commands and flushes to the BCM device + * associated with the voter. It conditionally generate WAKE and SLEEP commands + * based on deltas between WAKE/SLEEP requirements. The ws_list persists + * through multiple commit requests and bcm nodes are removed only when the + * requirements for WAKE matches SLEEP. + * + * Returns 0 on success, or an appropriate error code otherwise. + */ +int qcom_icc_bcm_voter_commit(struct bcm_voter *voter) +{ + struct qcom_icc_bcm *bcm; + struct qcom_icc_bcm *bcm_tmp; + int commit_idx[MAX_VCD + 1]; + struct tcs_cmd cmds[MAX_BCMS]; + int ret = 0; + + if (!voter) + return 0; + + mutex_lock(&voter->lock); + list_for_each_entry(bcm, &voter->commit_list, list) + bcm_aggregate(bcm); + + /* + * Pre sort the BCMs based on VCD for ease of generating a command list + * that groups the BCMs with the same VCD together. VCDs are numbered + * with lowest being the most expensive time wise, ensuring that + * those commands are being sent the earliest in the queue. This needs + * to be sorted every commit since we can't guarantee the order in which + * the BCMs are added to the list. + */ + list_sort(NULL, &voter->commit_list, cmp_vcd); + + /* + * Construct the command list based on a pre ordered list of BCMs + * based on VCD. + */ + tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_AMC, cmds, commit_idx); + + if (!commit_idx[0]) + goto out; + + ret = rpmh_invalidate(voter->dev); + if (ret) { + pr_err("Error invalidating RPMH client (%d)\n", ret); + goto out; + } + + ret = rpmh_write_batch(voter->dev, RPMH_ACTIVE_ONLY_STATE, + cmds, commit_idx); + if (ret) { + pr_err("Error sending AMC RPMH requests (%d)\n", ret); + goto out; + } + + list_for_each_entry_safe(bcm, bcm_tmp, &voter->commit_list, list) + list_del_init(&bcm->list); + + list_for_each_entry_safe(bcm, bcm_tmp, &voter->ws_list, ws_list) { + /* + * Only generate WAKE and SLEEP commands if a resource's + * requirements change as the execution environment transitions + * between different power states. + */ + if (bcm->vote_x[QCOM_ICC_BUCKET_WAKE] != + bcm->vote_x[QCOM_ICC_BUCKET_SLEEP] || + bcm->vote_y[QCOM_ICC_BUCKET_WAKE] != + bcm->vote_y[QCOM_ICC_BUCKET_SLEEP]) + list_add_tail(&bcm->list, &voter->commit_list); + else + list_del_init(&bcm->ws_list); + } + + if (list_empty(&voter->commit_list)) + goto out; + + list_sort(NULL, &voter->commit_list, cmp_vcd); + + tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_WAKE, cmds, commit_idx); + + ret = rpmh_write_batch(voter->dev, RPMH_WAKE_ONLY_STATE, cmds, commit_idx); + if (ret) { + pr_err("Error sending WAKE RPMH requests (%d)\n", ret); + goto out; + } + + tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_SLEEP, cmds, commit_idx); + + ret = rpmh_write_batch(voter->dev, RPMH_SLEEP_STATE, cmds, commit_idx); + if (ret) { + pr_err("Error sending SLEEP RPMH requests (%d)\n", ret); + goto out; + } + +out: + list_for_each_entry_safe(bcm, bcm_tmp, &voter->commit_list, list) + list_del_init(&bcm->list); + + mutex_unlock(&voter->lock); + return ret; +} +EXPORT_SYMBOL_GPL(qcom_icc_bcm_voter_commit); + +static int qcom_icc_bcm_voter_probe(struct platform_device *pdev) +{ + struct bcm_voter *voter; + + voter = devm_kzalloc(&pdev->dev, sizeof(*voter), GFP_KERNEL); + if (!voter) + return -ENOMEM; + + voter->dev = &pdev->dev; + voter->np = pdev->dev.of_node; + mutex_init(&voter->lock); + INIT_LIST_HEAD(&voter->commit_list); + INIT_LIST_HEAD(&voter->ws_list); + + mutex_lock(&bcm_voter_lock); + list_add_tail(&voter->voter_node, &bcm_voters); + mutex_unlock(&bcm_voter_lock); + + return 0; +} + +static const struct of_device_id bcm_voter_of_match[] = { + { .compatible = "qcom,bcm-voter" }, + { } +}; + +static struct platform_driver qcom_icc_bcm_voter_driver = { + .probe = qcom_icc_bcm_voter_probe, + .driver = { + .name = "bcm_voter", + .of_match_table = bcm_voter_of_match, + }, +}; +module_platform_driver(qcom_icc_bcm_voter_driver); + +MODULE_AUTHOR("David Dai <daidavid1@xxxxxxxxxxxxxx>"); +MODULE_DESCRIPTION("Qualcomm BCM Voter interconnect driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/interconnect/qcom/bcm-voter.h b/drivers/interconnect/qcom/bcm-voter.h new file mode 100644 index 0000000000000..3436673e9f104 --- /dev/null +++ b/drivers/interconnect/qcom/bcm-voter.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#ifndef __DRIVERS_INTERCONNECT_QCOM_BCM_VOTER_H__ +#define __DRIVERS_INTERCONNECT_QCOM_BCM_VOTER_H__ + +#include <soc/qcom/cmd-db.h> +#include <soc/qcom/rpmh.h> +#include <soc/qcom/tcs.h> + +#include "icc-rpmh.h" + +#define DEFINE_QBCM(_name, _bcmname, _keepalive, ...) \ +static struct qcom_icc_bcm _name = { \ + .name = _bcmname, \ + .keepalive = _keepalive, \ + .num_nodes = ARRAY_SIZE(((struct qcom_icc_node *[]){ __VA_ARGS__ })), \ + .nodes = { __VA_ARGS__ }, \ +} + +struct bcm_voter *of_bcm_voter_get(struct device *dev, const char *name); +void qcom_icc_bcm_voter_add(struct bcm_voter *voter, struct qcom_icc_bcm *bcm); +int qcom_icc_bcm_voter_commit(struct bcm_voter *voter); + +#endif diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c new file mode 100644 index 0000000000000..3ac5182c9ab21 --- /dev/null +++ b/drivers/interconnect/qcom/icc-rpmh.c @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include <linux/interconnect.h> +#include <linux/interconnect-provider.h> +#include <linux/module.h> + +#include "bcm-voter.h" +#include "icc-rpmh.h" + +/** + * qcom_icc_pre_aggregate - cleans up stale values from prior icc_set + * @node: icc node to operate on + */ +void qcom_icc_pre_aggregate(struct icc_node *node) +{ + size_t i; + struct qcom_icc_node *qn; + + qn = node->data; + + for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) { + qn->sum_avg[i] = 0; + qn->max_peak[i] = 0; + } +} +EXPORT_SYMBOL_GPL(qcom_icc_pre_aggregate); + +/** + * qcom_icc_aggregate - aggregate bw for buckets indicated by tag + * @node: node to aggregate + * @tag: tag to indicate which buckets to aggregate + * @avg_bw: new bw to sum aggregate + * @peak_bw: new bw to max aggregate + * @agg_avg: existing aggregate avg bw val + * @agg_peak: existing aggregate peak bw val + */ +int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw, + u32 peak_bw, u32 *agg_avg, u32 *agg_peak) +{ + size_t i; + struct qcom_icc_node *qn; + struct qcom_icc_provider *qp; + + qn = node->data; + qp = to_qcom_provider(node->provider); + + if (!tag) + tag = QCOM_ICC_TAG_ALWAYS; + + for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) { + if (tag & BIT(i)) { + qn->sum_avg[i] += avg_bw; + qn->max_peak[i] = max_t(u32, qn->max_peak[i], peak_bw); + } + } + + *agg_avg += avg_bw; + *agg_peak = max_t(u32, *agg_peak, peak_bw); + + for (i = 0; i < qn->num_bcms; i++) + qcom_icc_bcm_voter_add(qp->voter, qn->bcms[i]); + + return 0; +} +EXPORT_SYMBOL_GPL(qcom_icc_aggregate); + +/** + * qcom_icc_set - set the constraints based on path + * @src: source node for the path to set constraints on + * @dst: destination node for the path to set constraints on + * + * Return: 0 on success, or an error code otherwise + */ +int qcom_icc_set(struct icc_node *src, struct icc_node *dst) +{ + struct qcom_icc_provider *qp; + struct icc_node *node; + + if (!src) + node = dst; + else + node = src; + + qp = to_qcom_provider(node->provider); + + qcom_icc_bcm_voter_commit(qp->voter); + + return 0; +} +EXPORT_SYMBOL_GPL(qcom_icc_set); + +/** + * qcom_icc_bcm_init - populates bcm aux data and connect qnodes + * @bcm: bcm to be initialized + * @dev: associated provider device + * + * Return: 0 on success, or an error code otherwise + */ +int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev) +{ + struct qcom_icc_node *qn; + const struct bcm_db *data; + size_t data_count; + int i; + + /* BCM is already initialised*/ + if (bcm->addr) + return 0; + + bcm->addr = cmd_db_read_addr(bcm->name); + if (!bcm->addr) { + dev_err(dev, "%s could not find RPMh address\n", + bcm->name); + return -EINVAL; + } + + data = cmd_db_read_aux_data(bcm->name, &data_count); + if (IS_ERR(data)) { + dev_err(dev, "%s command db read error (%ld)\n", + bcm->name, PTR_ERR(data)); + return PTR_ERR(data); + } + if (!data_count) { + dev_err(dev, "%s command db missing or partial aux data\n", + bcm->name); + return -EINVAL; + } + + bcm->aux_data.unit = le32_to_cpu(data->unit); + bcm->aux_data.width = le16_to_cpu(data->width); + bcm->aux_data.vcd = data->vcd; + bcm->aux_data.reserved = data->reserved; + INIT_LIST_HEAD(&bcm->list); + INIT_LIST_HEAD(&bcm->ws_list); + + /* Link Qnodes to their respective BCMs */ + for (i = 0; i < bcm->num_nodes; i++) { + qn = bcm->nodes[i]; + qn->bcms[qn->num_bcms] = bcm; + qn->num_bcms++; + } + + return 0; +} +EXPORT_SYMBOL_GPL(qcom_icc_bcm_init); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/interconnect/qcom/icc-rpmh.h b/drivers/interconnect/qcom/icc-rpmh.h new file mode 100644 index 0000000000000..903d25e61984d --- /dev/null +++ b/drivers/interconnect/qcom/icc-rpmh.h @@ -0,0 +1,149 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__ +#define __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__ + +#define to_qcom_provider(_provider) \ + container_of(_provider, struct qcom_icc_provider, provider) + +/** + * struct qcom_icc_provider - Qualcomm specific interconnect provider + * @provider: generic interconnect provider + * @dev: reference to the NoC device + * @bcms: list of bcms that maps to the provider + * @num_bcms: number of @bcms + * @voter: bcm voter targeted by this provider + */ +struct qcom_icc_provider { + struct icc_provider provider; + struct device *dev; + struct qcom_icc_bcm **bcms; + size_t num_bcms; + struct bcm_voter *voter; +}; + +/** + * struct bcm_db - Auxiliary data pertaining to each Bus Clock Manager (BCM) + * @unit: divisor used to convert bytes/sec bw value to an RPMh msg + * @width: multiplier used to convert bytes/sec bw value to an RPMh msg + * @vcd: virtual clock domain that this bcm belongs to + * @reserved: reserved field + */ +struct bcm_db { + __le32 unit; + __le16 width; + u8 vcd; + u8 reserved; +}; + +#define MAX_LINKS 128 +#define MAX_BCMS 64 +#define MAX_BCM_PER_NODE 3 +#define MAX_VCD 10 + +/* + * The AMC bucket denotes constraints that are applied to hardware when + * icc_set_bw() completes, whereas the WAKE and SLEEP constraints are applied + * when the execution environment transitions between active and low power mode. + */ +#define QCOM_ICC_BUCKET_AMC 0 +#define QCOM_ICC_BUCKET_WAKE 1 +#define QCOM_ICC_BUCKET_SLEEP 2 +#define QCOM_ICC_NUM_BUCKETS 3 +#define QCOM_ICC_TAG_AMC BIT(QCOM_ICC_BUCKET_AMC) +#define QCOM_ICC_TAG_WAKE BIT(QCOM_ICC_BUCKET_WAKE) +#define QCOM_ICC_TAG_SLEEP BIT(QCOM_ICC_BUCKET_SLEEP) +#define QCOM_ICC_TAG_ACTIVE_ONLY (QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE) +#define QCOM_ICC_TAG_ALWAYS (QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE |\ + QCOM_ICC_TAG_SLEEP) + +/** + * struct qcom_icc_node - Qualcomm specific interconnect nodes + * @name: the node name used in debugfs + * @links: an array of nodes where we can go next while traversing + * @id: a unique node identifier + * @num_links: the total number of @links + * @channels: num of channels at this node + * @buswidth: width of the interconnect between a node and the bus + * @sum_avg: current sum aggregate value of all avg bw requests + * @max_peak: current max aggregate value of all peak bw requests + * @bcms: list of bcms associated with this logical node + * @num_bcms: num of @bcms + */ +struct qcom_icc_node { + const char *name; + u16 links[MAX_LINKS]; + u16 id; + u16 num_links; + u16 channels; + u16 buswidth; + u64 sum_avg[QCOM_ICC_NUM_BUCKETS]; + u64 max_peak[QCOM_ICC_NUM_BUCKETS]; + struct qcom_icc_bcm *bcms[MAX_BCM_PER_NODE]; + size_t num_bcms; +}; + +/** + * struct qcom_icc_bcm - Qualcomm specific hardware accelerator nodes + * known as Bus Clock Manager (BCM) + * @name: the bcm node name used to fetch BCM data from command db + * @type: latency or bandwidth bcm + * @addr: address offsets used when voting to RPMH + * @vote_x: aggregated threshold values, represents sum_bw when @type is bw bcm + * @vote_y: aggregated threshold values, represents peak_bw when @type is bw bcm + * @dirty: flag used to indicate whether the bcm needs to be committed + * @keepalive: flag used to indicate whether a keepalive is required + * @aux_data: auxiliary data used when calculating threshold values and + * communicating with RPMh + * @list: used to link to other bcms when compiling lists for commit + * @ws_list: used to keep track of bcms that may transition between wake/sleep + * @num_nodes: total number of @num_nodes + * @nodes: list of qcom_icc_nodes that this BCM encapsulates + */ +struct qcom_icc_bcm { + const char *name; + u32 type; + u32 addr; + u64 vote_x[QCOM_ICC_NUM_BUCKETS]; + u64 vote_y[QCOM_ICC_NUM_BUCKETS]; + bool dirty; + bool keepalive; + struct bcm_db aux_data; + struct list_head list; + struct list_head ws_list; + size_t num_nodes; + struct qcom_icc_node *nodes[]; +}; + +struct qcom_icc_fabric { + struct qcom_icc_node **nodes; + size_t num_nodes; +}; + +struct qcom_icc_desc { + struct qcom_icc_node **nodes; + size_t num_nodes; + struct qcom_icc_bcm **bcms; + size_t num_bcms; +}; + +#define DEFINE_QNODE(_name, _id, _channels, _buswidth, ...) \ + static struct qcom_icc_node _name = { \ + .id = _id, \ + .name = #_name, \ + .channels = _channels, \ + .buswidth = _buswidth, \ + .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \ + .links = { __VA_ARGS__ }, \ + } + +int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw, + u32 peak_bw, u32 *agg_avg, u32 *agg_peak); +int qcom_icc_set(struct icc_node *src, struct icc_node *dst); +int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev); +void qcom_icc_pre_aggregate(struct icc_node *node); + +#endif -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project