Re: [PATCH] arm64: dts: sc7180: Move venus node to the correct position

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Feb 26, 2020 at 12:40:23PM -0800, Doug Anderson wrote:
> Hi,
> 
> On Wed, Feb 26, 2020 at 11:40 AM Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote:
> >
> > Per convention device nodes for SC7180 should be ordered by address.
> > This is currently not the case for the venus node, move it to the
> > correct position.
> >
> > Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> > ---
> >
> >  arch/arm64/boot/dts/qcom/sc7180.dtsi | 52 ++++++++++++++--------------
> >  1 file changed, 26 insertions(+), 26 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > index 253274d5f04c..5f97945e16a4 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > @@ -1332,6 +1332,32 @@ system-cache-controller@9200000 {
> >                         interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
> >                 };
> >
> > +               venus: video-codec@aa00000 {
> > +                       compatible = "qcom,sc7180-venus";
> > +                       reg = <0 0x0aa00000 0 0xff000>;
> > +                       interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> > +                       power-domains = <&videocc VENUS_GDSC>,
> > +                                       <&videocc VCODEC0_GDSC>;
> > +                       power-domain-names = "venus", "vcodec0";
> > +                       clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
> > +                                <&videocc VIDEO_CC_VENUS_AHB_CLK>,
> > +                                <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
> > +                                <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
> > +                                <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
> > +                       clock-names = "core", "iface", "bus",
> > +                                     "vcodec0_core", "vcodec0_bus";
> > +                       iommus = <&apps_smmu 0x0c00 0x60>;
> > +                       memory-region = <&venus_mem>;
> > +
> > +                       video-decoder {
> > +                               compatible = "venus-decoder";
> > +                       };
> > +
> > +                       video-encoder {
> > +                               compatible = "venus-encoder";
> > +                       };
> > +               };
> > +
> >                 usb_1: usb@a6f8800 {
> >                         compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
> >                         reg = <0 0x0a6f8800 0 0x400>;
> 
> Maybe try one more time?
> 
> >>> print [hex(x) for x in sorted([0x0aa00000, 0x0a6f8800])]
> ['0xa6f8800', '0xaa00000']
> 
> ...makes me convinced that the codec should come _after_ the USB node, no?

indeed, thanks for catching it!



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux