Re: [PATCH v1 1/3] dt-bindings: thermal: tsens: Make dtbs_check pass for sc7180 tsens

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 25-02-20, 13:01, Amit Kucheria wrote:
> Fixes the following warnings:
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible: ['qcom,sc7180-tsens',
> 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
> causes of the failure):
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:1: 'qcom,tsens-v0_1' was expected
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:1: 'qcom,tsens-v1' was expected

I think the patch title should be "add qcom,sc7180-tsens to  qcom-tsens.yaml"

and it would be great to see explanation on how adding it fixes these
warns.

Relooking at series I think this applies to rest of the series too :)

Thanks


> 
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible: ['qcom,sc7180-tsens',
> 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
> causes of the failure):
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:1: 'qcom,tsens-v0_1' was expected
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:1: 'qcom,tsens-v1' was expected
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index eef13b9446a8..13e294328932 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -39,6 +39,7 @@ properties:
>                - qcom,msm8996-tsens
>                - qcom,msm8998-tsens
>                - qcom,sdm845-tsens
> +              - qcom,sc7180-tsens
>            - const: qcom,tsens-v2
>  
>    reg:
> -- 
> 2.20.1

-- 
~Vinod



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux