Re: [V2, 2/3] interconnect: qcom: Add SC7180 interconnect provider driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020-01-05 12:25, Stephen Boyd wrote:
Quoting Odelu Kukatla (2019-12-31 00:58:56)
diff --git a/drivers/interconnect/qcom/sc7180.c b/drivers/interconnect/qcom/sc7180.c
new file mode 100644
index 0000000..4a398e0
--- /dev/null
+++ b/drivers/interconnect/qcom/sc7180.c
@@ -0,0 +1,788 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#include <dt-bindings/interconnect/qcom,sc7180.h>

Can you include this after linux/ headers? That is the "preferred" way
to include headers.

done.
+#include <linux/device.h>
+#include <linux/interconnect.h>
+#include <linux/interconnect-provider.h>
+#include <linux/module.h>
+#include <linux/of_device.h>

Hopefully this include isn't used and can be removed.

I will remove it.
+#include <linux/of_platform.h>

Is this include used?

I will remove it.
+#include <linux/platform_device.h>
+
+#include "icc-rpmh.h"
+#include "bcm-voter.h"
+
[...]
+
+static struct qcom_icc_node *system_noc_nodes[] = {
+       [MASTER_SNOC_CFG] = &qhm_snoc_cfg,
+       [MASTER_A1NOC_SNOC] = &qnm_aggre1_noc,
+       [MASTER_A2NOC_SNOC] = &qnm_aggre2_noc,
+       [MASTER_GEM_NOC_SNOC] = &qnm_gemnoc,
+       [MASTER_PIMEM] = &qxm_pimem,
+       [SLAVE_APPSS] = &qhs_apss,
+       [SLAVE_SNOC_CNOC] = &qns_cnoc,
+       [SLAVE_SNOC_GEM_NOC_GC] = &qns_gemnoc_gc,
+       [SLAVE_SNOC_GEM_NOC_SF] = &qns_gemnoc_sf,
+       [SLAVE_IMEM] = &qxs_imem,
+       [SLAVE_PIMEM] = &qxs_pimem,
+       [SLAVE_SERVICE_SNOC] = &srvc_snoc,
+       [SLAVE_QDSS_STM] = &xs_qdss_stm,
+       [SLAVE_TCU] = &xs_sys_tcu_cfg,
+};
+
+static struct qcom_icc_desc sc7180_system_noc = {

Can this be const? And the other ones?
yes, will change it.
+       .nodes = system_noc_nodes,
+       .num_nodes = ARRAY_SIZE(system_noc_nodes),
+       .bcms = system_noc_bcms,
+       .num_bcms = ARRAY_SIZE(system_noc_bcms),
+};
+
+static int qnoc_probe(struct platform_device *pdev)
+{
+       const struct qcom_icc_desc *desc;
+       struct icc_onecell_data *data;
+       struct icc_provider *provider;
+       struct qcom_icc_node **qnodes;
+       struct qcom_icc_provider *qp;
+       struct icc_node *node;
+       size_t num_nodes, i;
+       int ret;
+
+       desc = of_device_get_match_data(&pdev->dev);

Use device_get_match_data() instead?

will update it.
+       if (!desc)
+               return -EINVAL;
+
+       qnodes = desc->nodes;
+       num_nodes = desc->num_nodes;
+
+       qp = devm_kzalloc(&pdev->dev, sizeof(*qp), GFP_KERNEL);
+       if (!qp)
+               return -ENOMEM;
+
+ data = devm_kcalloc(&pdev->dev, num_nodes, sizeof(*node), GFP_KERNEL);
+       if (!data)
+               return -ENOMEM;
+
+       provider = &qp->provider;
+       provider->dev = &pdev->dev;
+       provider->set = qcom_icc_set;
+       provider->pre_aggregate = qcom_icc_pre_aggregate;
+       provider->aggregate = qcom_icc_aggregate;
+       provider->xlate = of_icc_xlate_onecell;
+       INIT_LIST_HEAD(&provider->nodes);
+       provider->data = data;
+
+       qp->dev = &pdev->dev;
+       qp->bcms = desc->bcms;
+       qp->num_bcms = desc->num_bcms;
+
+       qp->voter = of_bcm_voter_get(qp->dev, NULL);
+       if (IS_ERR(qp->voter))
+               return PTR_ERR(qp->voter);
+
+       ret = icc_provider_add(provider);
+       if (ret) {
+ dev_err(&pdev->dev, "error adding interconnect provider\n");
+               return ret;
+       }
+
+       for (i = 0; i < num_nodes; i++) {
+               size_t j;
+
+               if (!qnodes[i])
+                       continue;
+
+               node = icc_node_create(qnodes[i]->id);
+               if (IS_ERR(node)) {
+                       ret = PTR_ERR(node);
+                       goto err;
+               }
+
+               node->name = qnodes[i]->name;
+               node->data = qnodes[i];
+               icc_node_add(node, provider);
+
+ dev_dbg(&pdev->dev, "registered node %pK %s %d\n", node,
+                       qnodes[i]->name, node->id);

Is this more debug junk? Maybe if it is useful it can be part of the
core framework instead of in this driver?

+
+               /* populate links */

Useless comment.
i will clean up this.
+               for (j = 0; j < qnodes[i]->num_links; j++)
+                       icc_link_create(node, qnodes[i]->links[j]);
+
+               data->nodes[i] = node;
+       }
+       data->num_nodes = num_nodes;
+
+       for (i = 0; i < qp->num_bcms; i++)
+               qcom_icc_bcm_init(qp->bcms[i], &pdev->dev);
+
+       platform_set_drvdata(pdev, qp);
+
+       dev_dbg(&pdev->dev, "Registered SC7180 ICC\n");

This driver debug message is pretty useless. Please remove it.
i will removr it.
+
+       return ret;

return 0?

+err:
+       icc_nodes_remove(provider);
+       icc_provider_del(provider);
+       return ret;
+}
+
+static int qnoc_remove(struct platform_device *pdev)
+{
+       struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
+
+       icc_nodes_remove(&qp->provider);
+       return icc_provider_del(&qp->provider);
+}
+
+static const struct of_device_id qnoc_of_match[] = {
+       { .compatible = "qcom,sc7180-aggre1-noc",
+         .data = &sc7180_aggre1_noc},
+       { .compatible = "qcom,sc7180-aggre2-noc",
+         .data = &sc7180_aggre2_noc},
+       { .compatible = "qcom,sc7180-camnoc-virt",
+         .data = &sc7180_camnoc_virt},
+       { .compatible = "qcom,sc7180-compute-noc",
+         .data = &sc7180_compute_noc},
+       { .compatible = "qcom,sc7180-config-noc",
+         .data = &sc7180_config_noc},
+       { .compatible = "qcom,sc7180-dc-noc",
+         .data = &sc7180_dc_noc},
+       { .compatible = "qcom,sc7180-gem-noc",
+         .data = &sc7180_gem_noc},
+       { .compatible = "qcom,sc7180-ipa-virt",
+         .data = &sc7180_ipa_virt},
+       { .compatible = "qcom,sc7180-mc-virt",
+         .data = &sc7180_mc_virt},
+       { .compatible = "qcom,sc7180-mmss-noc",
+         .data = &sc7180_mmss_noc},
+       { .compatible = "qcom,sc7180-npu-noc",
+         .data = &sc7180_npu_noc},
+       { .compatible = "qcom,sc7180-qup-virt",
+         .data = &sc7180_qup_virt},
+       { .compatible = "qcom,sc7180-system-noc",
+         .data = &sc7180_system_noc},
+       { },

Nitpick: Drop the comma as it's the sentinel and nothing can come after.
will remove it.
+};
+MODULE_DEVICE_TABLE(of, qnoc_of_match);



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux