[RFC v4 0/2] Add SDHC interconnect bandwidth scaling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add interconnect bandwidths for SDHC driver using OPP framework that
is required by SDHC driver based on the clock frequency and bus width
of the card. Otherwise, the system clocks may run at minimum clock
speed and thus affecting the performance.

This change is based on
[RFC] mmc: host: sdhci-msm: Use the interconnect API
(https://lkml.org/lkml/2018/10/11/499) and

[PATCH v6] Introduce Bandwidth OPPs for interconnects
(https://lkml.org/lkml/2019/12/6/740)

Pradeep P V K (2):
  mmc: sdhci-msm: Add interconnect bus bandwidth scaling support
  dt-bindings: mmc: sdhci-msm: Add interconnect BW scaling strings

 .../devicetree/bindings/mmc/sdhci-msm.txt          |  18 ++
 drivers/mmc/host/sdhci-msm.c                       | 204 ++++++++++++++++++++-
 2 files changed, 218 insertions(+), 4 deletions(-)

--
changes from RFC v3 -> v4:
- Addressed review comments from Bjorn and Matthias
1.9.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux