[PATCH v5 3/3] arm64: dts: sdm845: Add interconnect properties for USB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Populate USB DT nodes with interconnect properties.

Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index ae7d661..6b59f42 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2563,6 +2563,12 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
+			interconnects = <&aggre2_noc MASTER_USB3_0
+					 &mem_noc SLAVE_EBI1>,
+					<&gladiator_noc MASTER_APPSS_PROC
+					 &config_noc SLAVE_USB3_0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
 			usb_1_dwc3: dwc3@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
@@ -2607,6 +2613,12 @@
 
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 
+			interconnects = <&aggre2_noc MASTER_USB3_1
+					 &mem_noc SLAVE_EBI1>,
+					<&gladiator_noc MASTER_APPSS_PROC
+					 &config_noc SLAVE_USB3_1>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
 			usb_2_dwc3: dwc3@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a800000 0 0xcd00>;
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux