[v1] dt-bindings: msm:disp: update dsi and dpu bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Updating bindings of dsi and dpu by adding and removing certain
properties.

Signed-off-by: Harigovindan P <harigovi@xxxxxxxxxxxxxx>
---

Changes in v1:
        - Adding "ahb" clock as a required property.
        - Adding "bus", "rot", "lut" as optional properties for sc7180 device.
        - Removing properties from dsi bindings that are unused.
	- Removing power-domain property since DSI is the child node of MDSS
	  and it will inherit supply from its parent.

 Documentation/devicetree/bindings/display/msm/dpu.txt | 7 +++++++
 Documentation/devicetree/bindings/display/msm/dsi.txt | 5 -----
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
index 551ae26..dd58472a 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
@@ -19,6 +19,7 @@ Required properties:
   The following clocks are required:
   * "iface"
   * "bus"
+  * "ahb"
   * "core"
 - interrupts: interrupt signal from MDSS.
 - interrupt-controller: identifies the node as an interrupt controller.
@@ -50,6 +51,8 @@ Required properties:
 - clock-names: device clock names, must be in same order as clocks property.
   The following clocks are required.
   * "bus"
+  For the device "qcom,sc7180-dpu":
+  * "bus" - is an optional property due to architecture change.
   * "iface"
   * "core"
   * "vsync"
@@ -70,6 +73,10 @@ Optional properties:
 - assigned-clocks: list of clock specifiers for clocks needing rate assignment
 - assigned-clock-rates: list of clock frequencies sorted in the same order as
   the assigned-clocks property.
+- For the device "qcom,sc7180-dpu":
+  clock-names: optional device clocks, needed for accessing LUT blocks.
+  * "rot"
+  * "lut"
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index af95586..61d659a 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -8,13 +8,10 @@ Required properties:
 - reg-names: The names of register regions. The following regions are required:
   * "dsi_ctrl"
 - interrupts: The interrupt signal from the DSI block.
-- power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: Phandles to device clocks.
 - clock-names: the following clocks are required:
-  * "mdp_core"
   * "iface"
   * "bus"
-  * "core_mmss"
   * "byte"
   * "pixel"
   * "core"
@@ -156,7 +153,6 @@ Example:
 			"core",
 			"core_mmss",
 			"iface",
-			"mdp_core",
 			"pixel";
 		clocks =
 			<&mmcc MDSS_AXI_CLK>,
@@ -164,7 +160,6 @@ Example:
 			<&mmcc MDSS_ESC0_CLK>,
 			<&mmcc MMSS_MISC_AHB_CLK>,
 			<&mmcc MDSS_AHB_CLK>,
-			<&mmcc MDSS_MDP_CLK>,
 			<&mmcc MDSS_PCLK0_CLK>;
 
 		assigned-clocks =
-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux