Quoting Sandeep Maheswaram (2020-01-29 05:51:59) > Overriding the QUSB2 V2 Phy tuning parameters for SC7180 IDP device. > > Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx> > --- > arch/arm64/boot/dts/qcom/sc7180-idp.dts | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts > index 388f50a..826cf02 100644 > --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts > +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts > @@ -276,9 +276,11 @@ > vdda-pll-supply = <&vreg_l11a_1p8>; > vdda-phy-dpdm-supply = <&vreg_l17a_3p0>; > qcom,imp-res-offset-value = <8>; > - qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; > - qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; > + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>; > qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; > + qcom,bias-ctrl-value = <0x22>; > + qcom,charge-ctrl-value = <3>; > + qcom,hsdisc-trim-value = <0>; Actually, I'd prefer it uses /bits/ 8 here if it's just 8 bits.
