Add support for overriding QUSB2 V2 phy tuning parameters
in device tree bindings.
Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/phy/qcom,qusb2-phy.yaml | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index 43082c8..dfef356 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -80,6 +80,28 @@ properties:
maximum: 63
default: 0
+ qcom,bias-ctrl-value:
+ description:
+ It is a 6 bit value that specifies bias-ctrl-value. It is a PHY
+ tuning parameter that may vary for different boards of same SOC.
+ This property is applicable to only QUSB2 v2 PHY.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ maximum: 63
+ default: 0
+
+ qcom,charge-ctrl-value:
+ description:
+ It is a 2 bit value that specifies charge-ctrl-value. It is a PHY
+ tuning parameter that may vary for different boards of same SOC.
+ This property is applicable to only QUSB2 v2 PHY.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ maximum: 3
+ default: 0
+
qcom,hstx-trim-value:
description:
It is a 4 bit value that specifies tuning for HSTX
@@ -118,6 +140,17 @@ properties:
maximum: 1
default: 0
+ qcom,hsdisc-trim-value:
+ description:
+ It is a 2 bit value tuning parameter that control disconnect
+ threshold and may vary for different boards of same SOC.
+ This property is applicable to only QUSB2 v2 PHY.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ maximum: 3
+ default: 0
+
required:
- compatible
- reg
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
