[PATCH v4 3/8] phy: qcom-qusb2: Add generic QUSB2 V2 PHY support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add generic QUSB2 V2 PHY table so the respective phys
can use the same table.

Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
---
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index bf94a52..70c9da6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017, 2019, The Linux Foundation. All rights reserved.
  */
 
 #include <linux/clk.h>
@@ -177,7 +177,7 @@ static const struct qusb2_phy_init_tbl msm8998_init_tbl[] = {
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
 };
 
-static const unsigned int sdm845_regs_layout[] = {
+static const unsigned int qusb2_v2_regs_layout[] = {
 	[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
 	[QUSB2PHY_PLL_STATUS]		= 0x1a0,
 	[QUSB2PHY_PORT_TUNE1]		= 0x240,
@@ -191,7 +191,7 @@ static const unsigned int sdm845_regs_layout[] = {
 	[QUSB2PHY_INTR_CTRL]		= 0x230,
 };
 
-static const struct qusb2_phy_init_tbl sdm845_init_tbl[] = {
+static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = {
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03),
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c),
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80),
@@ -258,10 +258,10 @@ static const struct qusb2_phy_cfg msm8998_phy_cfg = {
 	.update_tune1_with_efuse = true,
 };
 
-static const struct qusb2_phy_cfg sdm845_phy_cfg = {
-	.tbl		= sdm845_init_tbl,
-	.tbl_num	= ARRAY_SIZE(sdm845_init_tbl),
-	.regs		= sdm845_regs_layout,
+static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
+	.tbl		= qusb2_v2_init_tbl,
+	.tbl_num	= ARRAY_SIZE(qusb2_v2_init_tbl),
+	.regs		= qusb2_v2_regs_layout,
 
 	.disable_ctrl	= (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN |
 			   POWER_DOWN),
@@ -774,8 +774,8 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
 		.compatible	= "qcom,msm8998-qusb2-phy",
 		.data		= &msm8998_phy_cfg,
 	}, {
-		.compatible	= "qcom,sdm845-qusb2-phy",
-		.data		= &sdm845_phy_cfg,
+		.compatible	= "qcom,qusb2-v2-phy",
+		.data		= &qusb2_v2_phy_cfg,
 	},
 	{ },
 };
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux