Re: [RFC v3 00/10] DDR/L3 Scaling support on SDM845 and SC7180 SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sibi,

In my opinion this solution depends on not always true assumption that
CPUFreq notification chain will be triggered when there is a frequency
switch. Extending devfreq governor (as in one of the dependent patch
series that you have referred) by attaching to this notification
chain makes sense only when the SchedUtil and fast_switch is not in use.
The Schedutil CPUFreq governor might use the fast_switch from this
driver and the notifications will not be triggered. I have also
commented patch 08/10 which tries to disable it.

Regards,
Lukasz

On 1/27/20 8:03 PM, Sibi Sankar wrote:
This RFC series aims to extend cpu based scaling support to L3/DDR on
SDM845 and SC7180 SoCs.

Patches [1-3] - Blacklist SDM845 and SC7180 in cpufreq-dt-platdev
Patches [5-7] - Hack in a way to add/remove multiple opp tables to
                 a single device. I am yet to fix the debugfs to
		support multiple opp_tables per device but wanted to
		send what was working upstream to get an idea if multiple
		opp tables per device is a feature that will be useful
		upstream.
Patches [9-10] - Add the cpu/cpu-ddr/cpu-l3 opp tables for SDM845
                  and SC7180 SoCs.

v3:
  * Migrated to using Saravana's opp-kBps bindings [1]
  * Fixed some misc comments from Rajendra
  * Added support for SC7180

v2:
  * Incorporated Viresh's comments from:
  https://lore.kernel.org/lkml/20190410102429.r6j6brm5kspmqxc3@vireshk-i7/
  https://lore.kernel.org/lkml/20190410112516.gnh77jcwawvld6et@vireshk-i7/
  * Dropped cpufreq-map passive governor

Git-branch: https://github.com/QuinAsura/linux/tree/lnext-012420

Some alternate ways of hosting the opp-tables:
https://github.com/QuinAsura/linux/commit/50b92bfaadc8f9a0d1e12249646e018bd6d1a9d3
https://github.com/QuinAsura/linux/commit/3d23d1eefd16ae6d9e3ef91e93e78749d8844e98
Viresh didn't really like ^^ bindings and they dont really scale well. Just
including them here for completeness.

Depends on the following series:
[1] https://patchwork.kernel.org/cover/11277199/
[2] https://patchwork.kernel.org/cover/11055499/
[3] https://patchwork.kernel.org/cover/11326381/

Sibi Sankar (10):
   arm64: dts: qcom: sdm845: Add SoC compatible to MTP
   cpufreq: blacklist SDM845 in cpufreq-dt-platdev
   cpufreq: blacklist SC7180 in cpufreq-dt-platdev
   OPP: Add and export helper to update voltage
   opp: of: export _opp_of_get_opp_desc_node
   opp: Allow multiple opp_tables to be mapped to a single device
   opp: Remove multiple attached opp tables from a device
   cpufreq: qcom: Update the bandwidth levels on frequency change
   arm64: dts: qcom: sdm845: Add cpu OPP tables
   arm64: dts: qcom: sc7180: Add cpu OPP tables

  arch/arm64/boot/dts/qcom/sc7180.dtsi    | 287 +++++++++++++++
  arch/arm64/boot/dts/qcom/sdm845-mtp.dts |   2 +-
  arch/arm64/boot/dts/qcom/sdm845.dtsi    | 453 ++++++++++++++++++++++++
  drivers/cpufreq/cpufreq-dt-platdev.c    |   2 +
  drivers/cpufreq/qcom-cpufreq-hw.c       | 246 +++++++++++--
  drivers/opp/core.c                      | 111 +++++-
  drivers/opp/of.c                        |   3 +-
  drivers/opp/opp.h                       |   2 +
  include/linux/pm_opp.h                  |  10 +
  9 files changed, 1083 insertions(+), 33 deletions(-)




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux