Re: [v4] arm64: dts: sc7180: add display dt nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020-01-29 02:02, Matthias Kaehlcke wrote:
Hi,

On Tue, Jan 28, 2020 at 06:54:44PM +0530, Harigovindan P wrote:
Add display, DSI hardware DT nodes for sc7180.

Signed-off-by: Harigovindan P <harigovi@xxxxxxxxxxxxxx>
---

Changes in v1:
	-Added display DT nodes for sc7180
Changes in v2:
	-Renamed node names
	-Corrected code alignments
	-Removed extra new line
	-Added DISP AHB clock for register access
	under display_subsystem node for global settings
Changes in v3:
	-Modified node names
	-Modified hard coded values
	-Removed mdss reg entry
Changes in v4:
	-Reverting mdp node name
	-Setting status to disabled in main SOC dtsi file
	-Replacing _ to - for node names
	-Adding clock dependency patch link
	-Splitting idp dt file to a separate patch

This patch has dependency on the below series
https://lkml.org/lkml/2019/12/27/73
arch/arm64/boot/dts/qcom/sc7180.dtsi | 128 +++++++++++++++++++++++++++++++++++
 1 file changed, 128 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 3bc3f64..c3883af 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1184,6 +1184,134 @@
 			#power-domain-cells = <1>;
 		};

+		mdss: mdss@ae00000 {
+			compatible = "qcom,sc7180-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "gcc_bus", "ahb", "core";
+
+			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			assigned-clock-rates = <300000000>;
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x800 0x2>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			mdss_mdp: mdp@ae01000 {
+				compatible = "qcom,sc7180-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>,
+				      <0 0x0af03000 0 0x16>;
+				reg-names = "mdp", "vbif", "disp_cc";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "iface", "rot", "lut", "core",
+					      "vsync";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <300000000>,
+						       <19200000>;

The clock rate for DISP_CC_MDSS_MDP_CLK is already specified in the
parent node, do we really want/need to specify it twice?

Hi,

The parent device ( MDSS ) configures global HW settings which needs MDP CLK to be turned on with a default rate. mdp device handles the composition, and it will compute the frequency needed as per the layer stack in the composition, hence we can have multiple rates on the CLK.



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux