Hi Doug,
Thanks for the patch.
On 1/25/2020 4:12 AM, Douglas Anderson wrote:
The bindings file (qcom,dispcc.yaml) says that the two clocks that
dispcc is a client of are named "xo" and "gpll0". That means we have
to refer to them by those names. We weren't referring to "xo"
properly in the driver.
Then, in the patch ("dt-bindings: clock: Fix qcom,dispcc bindings for
sdm845/sc7180") we clarify the names for all of the clocks that we are
a client of. Fix all those too, also getting rid of the "fallback"
names for them. Since sc7180 is still in infancy there is no reason
to specify a fallback name. People should just get the device tree
right.
Since we didn't add the "test" clock to the bindings (apparently it's
never used), kill it from the driver. If someone has a use for it we
should add it to the bindings and bring it back.
Instead of updating all of the sizes of the arrays now that the test
clock is gone, switch to using the less error-prone ARRAY_SIZE. Not
sure why it didn't always use that.
Fixes: dd3d06622138 ("clk: qcom: Add display clock controller driver for SC7180")
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
Changes in v2:
- Patch ("clk: qcom: Fix sc7180 dispcc parent data") new for v2.
drivers/clk/qcom/dispcc-sc7180.c | 63 ++++++++++++--------------------
1 file changed, 24 insertions(+), 39 deletions(-)
diff --git a/drivers/clk/qcom/dispcc-sc7180.c b/drivers/clk/qcom/dispcc-sc7180.c
index 30c1e25d3edb..380eca3f847d 100644
--- a/drivers/clk/qcom/dispcc-sc7180.c
+++ b/drivers/clk/qcom/dispcc-sc7180.c
@@ -43,7 +43,7 @@ static struct clk_alpha_pll disp_cc_pll0 = {
.hw.init = &(struct clk_init_data){
.name = "disp_cc_pll0",
.parent_data = &(const struct clk_parent_data){
- .fw_name = "bi_tcxo",
+ .fw_name = "xo",
These clock names are as per our HW design and we would not like to
update them as they require lot of hand-coding. These codes are all
auto-generated.
},
.num_parents = 1,
.ops = &clk_alpha_pll_fabia_ops,
@@ -76,40 +76,32 @@ static struct clk_alpha_pll_postdiv disp_cc_pll0_out_even = {
static const struct parent_map disp_cc_parent_map_0[] = {
{ P_BI_TCXO, 0 },
- { P_CORE_BI_PLL_TEST_SE, 7 },
};
static const struct clk_parent_data disp_cc_parent_data_0[] = {
- { .fw_name = "bi_tcxo" },
- { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
+ { .fw_name = "xo" },
};
static const struct parent_map disp_cc_parent_map_1[] = {
{ P_BI_TCXO, 0 },
{ P_DP_PHY_PLL_LINK_CLK, 1 },
{ P_DP_PHY_PLL_VCO_DIV_CLK, 2 },
- { P_CORE_BI_PLL_TEST_SE, 7 },
};
static const struct clk_parent_data disp_cc_parent_data_1[] = {
- { .fw_name = "bi_tcxo" },
- { .fw_name = "dp_phy_pll_link_clk", .name = "dp_phy_pll_link_clk" },
- { .fw_name = "dp_phy_pll_vco_div_clk",
- .name = "dp_phy_pll_vco_div_clk"},
- { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
+ { .fw_name = "xo" },
+ { .fw_name = "dp_phy_pll_link" },
+ { .fw_name = "dp_phy_pll_vco_div" },
similar comments for these too. They would conflict with our HW design
clock names.
};
static const struct parent_map disp_cc_parent_map_2[] = {
{ P_BI_TCXO, 0 },
{ P_DSI0_PHY_PLL_OUT_BYTECLK, 1 },
- { P_CORE_BI_PLL_TEST_SE, 7 },
};
static const struct clk_parent_data disp_cc_parent_data_2[] = {
- { .fw_name = "bi_tcxo" },
- { .fw_name = "dsi0_phy_pll_out_byteclk",
- .name = "dsi0_phy_pll_out_byteclk" },
- { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
+ { .fw_name = "xo" },
+ { .fw_name = "dsi_phy_pll_byte" },
};
static const struct parent_map disp_cc_parent_map_3[] = {
@@ -117,40 +109,33 @@ static const struct parent_map disp_cc_parent_map_3[] = {
{ P_DISP_CC_PLL0_OUT_MAIN, 1 },
{ P_GPLL0_OUT_MAIN, 4 },
{ P_DISP_CC_PLL0_OUT_EVEN, 5 },
- { P_CORE_BI_PLL_TEST_SE, 7 },
};
static const struct clk_parent_data disp_cc_parent_data_3[] = {
- { .fw_name = "bi_tcxo" },
+ { .fw_name = "xo" },
{ .hw = &disp_cc_pll0.clkr.hw },
- { .fw_name = "gcc_disp_gpll0_clk_src" },
+ { .fw_name = "gpll0" },
This is not the correct clock, we have a child/branch clock which
requires to be turned ON "gcc_disp_gpll0_clk_src" when we switch to this
source.
{ .hw = &disp_cc_pll0_out_even.clkr.hw },
- { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
};
static const struct parent_map disp_cc_parent_map_4[] = {
{ P_BI_TCXO, 0 },
{ P_GPLL0_OUT_MAIN, 4 },
- { P_CORE_BI_PLL_TEST_SE, 7 },
};
static const struct clk_parent_data disp_cc_parent_data_4[] = {
- { .fw_name = "bi_tcxo" },
- { .fw_name = "gcc_disp_gpll0_clk_src" },
- { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
+ { .fw_name = "xo" },
+ { .fw_name = "gpll0" },
same comment as above.
};
static const struct parent_map disp_cc_parent_map_5[] = {
{ P_BI_TCXO, 0 },
{ P_DSI0_PHY_PLL_OUT_DSICLK, 1 },
- { P_CORE_BI_PLL_TEST_SE, 7 },
};
static const struct clk_parent_data disp_cc_parent_data_5[] = {
- { .fw_name = "bi_tcxo" },
- { .fw_name = "dsi0_phy_pll_out_dsiclk",
- .name = "dsi0_phy_pll_out_dsiclk" },
- { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
+ { .fw_name = "xo" },
+ { .fw_name = "dsi_phy_pll_pixel" },
};
static const struct freq_tbl ftbl_disp_cc_mdss_ahb_clk_src[] = {
@@ -169,7 +154,7 @@ static struct clk_rcg2 disp_cc_mdss_ahb_clk_src = {
.clkr.hw.init = &(struct clk_init_data){
.name = "disp_cc_mdss_ahb_clk_src",
.parent_data = disp_cc_parent_data_4,
- .num_parents = 3,
+ .num_parents = ARRAY_SIZE(disp_cc_parent_data_4),
.flags = CLK_SET_RATE_PARENT,
.ops = &clk_rcg2_shared_ops,
},
@@ -183,7 +168,7 @@ static struct clk_rcg2 disp_cc_mdss_byte0_clk_src = {
.clkr.hw.init = &(struct clk_init_data){
.name = "disp_cc_mdss_byte0_clk_src",
.parent_data = disp_cc_parent_data_2,
- .num_parents = 3,
+ .num_parents = ARRAY_SIZE(disp_cc_parent_data_2),
.flags = CLK_SET_RATE_PARENT,
.ops = &clk_byte2_ops,
},
@@ -203,7 +188,7 @@ static struct clk_rcg2 disp_cc_mdss_dp_aux_clk_src = {
.clkr.hw.init = &(struct clk_init_data){
.name = "disp_cc_mdss_dp_aux_clk_src",
.parent_data = disp_cc_parent_data_0,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(disp_cc_parent_data_0),
.ops = &clk_rcg2_ops,
},
};
@@ -216,7 +201,7 @@ static struct clk_rcg2 disp_cc_mdss_dp_crypto_clk_src = {
.clkr.hw.init = &(struct clk_init_data){
.name = "disp_cc_mdss_dp_crypto_clk_src",
.parent_data = disp_cc_parent_data_1,
- .num_parents = 4,
+ .num_parents = ARRAY_SIZE(disp_cc_parent_data_1),
.flags = CLK_SET_RATE_PARENT,
.ops = &clk_byte2_ops,
},
@@ -230,7 +215,7 @@ static struct clk_rcg2 disp_cc_mdss_dp_link_clk_src = {
.clkr.hw.init = &(struct clk_init_data){
.name = "disp_cc_mdss_dp_link_clk_src",
.parent_data = disp_cc_parent_data_1,
- .num_parents = 4,
+ .num_parents = ARRAY_SIZE(disp_cc_parent_data_1),
.flags = CLK_SET_RATE_PARENT,
.ops = &clk_byte2_ops,
},
@@ -244,7 +229,7 @@ static struct clk_rcg2 disp_cc_mdss_dp_pixel_clk_src = {
.clkr.hw.init = &(struct clk_init_data){
.name = "disp_cc_mdss_dp_pixel_clk_src",
.parent_data = disp_cc_parent_data_1,
- .num_parents = 4,
+ .num_parents = ARRAY_SIZE(disp_cc_parent_data_1),
.flags = CLK_SET_RATE_PARENT,
.ops = &clk_dp_ops,
},
@@ -259,7 +244,7 @@ static struct clk_rcg2 disp_cc_mdss_esc0_clk_src = {
.clkr.hw.init = &(struct clk_init_data){
.name = "disp_cc_mdss_esc0_clk_src",
.parent_data = disp_cc_parent_data_2,
- .num_parents = 3,
+ .num_parents = ARRAY_SIZE(disp_cc_parent_data_2),
.ops = &clk_rcg2_ops,
},
};
@@ -282,7 +267,7 @@ static struct clk_rcg2 disp_cc_mdss_mdp_clk_src = {
.clkr.hw.init = &(struct clk_init_data){
.name = "disp_cc_mdss_mdp_clk_src",
.parent_data = disp_cc_parent_data_3,
- .num_parents = 5,
+ .num_parents = ARRAY_SIZE(disp_cc_parent_data_3),
.ops = &clk_rcg2_shared_ops,
},
};
@@ -295,7 +280,7 @@ static struct clk_rcg2 disp_cc_mdss_pclk0_clk_src = {
.clkr.hw.init = &(struct clk_init_data){
.name = "disp_cc_mdss_pclk0_clk_src",
.parent_data = disp_cc_parent_data_5,
- .num_parents = 3,
+ .num_parents = ARRAY_SIZE(disp_cc_parent_data_5),
.flags = CLK_SET_RATE_PARENT,
.ops = &clk_pixel_ops,
},
@@ -310,7 +295,7 @@ static struct clk_rcg2 disp_cc_mdss_rot_clk_src = {
.clkr.hw.init = &(struct clk_init_data){
.name = "disp_cc_mdss_rot_clk_src",
.parent_data = disp_cc_parent_data_3,
- .num_parents = 5,
+ .num_parents = ARRAY_SIZE(disp_cc_parent_data_3),
.ops = &clk_rcg2_shared_ops,
},
};
@@ -324,7 +309,7 @@ static struct clk_rcg2 disp_cc_mdss_vsync_clk_src = {
.clkr.hw.init = &(struct clk_init_data){
.name = "disp_cc_mdss_vsync_clk_src",
.parent_data = disp_cc_parent_data_0,
- .num_parents = 2,
+ .num_parents = ARRAY_SIZE(disp_cc_parent_data_0),
.ops = &clk_rcg2_shared_ops,
},
};
All the above code are auto-generated and we really do not want to
hand-code.
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
--
