On Thu, Jan 9, 2020 at 1:12 PM Sibi Sankar <sibis@xxxxxxxxxxxxxx> wrote: > > On some Qualcomm SoCs, Operating State Manager (OSM) controls the > resources of scaling L3 caches. Add a driver to handle bandwidth > requests to OSM L3 from CPU on SDM845 SoCs. > > Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx> > --- > drivers/interconnect/qcom/Kconfig | 7 + > drivers/interconnect/qcom/Makefile | 2 + > drivers/interconnect/qcom/osm-l3.c | 267 +++++++++++++++++++++++++++++ > 3 files changed, 276 insertions(+) > create mode 100644 drivers/interconnect/qcom/osm-l3.c > > diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig > index a9bbbdf7400f9..b94d28e7bf700 100644 > --- a/drivers/interconnect/qcom/Kconfig > +++ b/drivers/interconnect/qcom/Kconfig > @@ -14,6 +14,13 @@ config INTERCONNECT_QCOM_MSM8974 > This is a driver for the Qualcomm Network-on-Chip on msm8974-based > platforms. > > +config INTERCONNECT_QCOM_OSM_L3 > + tristate "Qualcomm OSM L3 interconnect driver" > + depends on INTERCONNECT_QCOM || COMPILE_TEST > + help > + Say y here to support the Operating State Manager (OSM) interconnect > + driver which controls the scaling of L3 caches on Qualcomm SoCs. > + > config INTERCONNECT_QCOM_QCS404 > tristate "Qualcomm QCS404 interconnect driver" > depends on INTERCONNECT_QCOM > diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile > index 55ec3c5c89dbd..89fecbd1257c7 100644 > --- a/drivers/interconnect/qcom/Makefile > +++ b/drivers/interconnect/qcom/Makefile > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0 > > +icc-osm-l3-objs := osm-l3.o > qnoc-msm8974-objs := msm8974.o > qnoc-qcs404-objs := qcs404.o > qnoc-sc7180-objs := sc7180.o > @@ -12,6 +13,7 @@ icc-smd-rpm-objs := smd-rpm.o > obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) += icc-bcm-voter.o > obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += qnoc-msm8916.o > obj-$(CONFIG_INTERCONNECT_QCOM_MSM8974) += qnoc-msm8974.o > +obj-$(CONFIG_INTERCONNECT_QCOM_OSM_L3) += icc-osm-l3.o > obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o > obj-$(CONFIG_INTERCONNECT_QCOM_RPMH) += icc-rpmh.o > obj-$(CONFIG_INTERCONNECT_QCOM_SC7180) += qnoc-sc7180.o > diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c > new file mode 100644 > index 0000000000000..7fde53c70081e > --- /dev/null > +++ b/drivers/interconnect/qcom/osm-l3.c > @@ -0,0 +1,267 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2019, The Linux Foundation. All rights reserved. > + * > + */ > + > +#include <dt-bindings/interconnect/qcom,osm-l3.h> > +#include <linux/bitfield.h> > +#include <linux/clk.h> > +#include <linux/interconnect-provider.h> > +#include <linux/io.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/of_platform.h> > +#include <linux/platform_device.h> > + > +#define LUT_MAX_ENTRIES 40U > +#define LUT_SRC GENMASK(31, 30) > +#define LUT_L_VAL GENMASK(7, 0) > +#define LUT_ROW_SIZE 32 > +#define CLK_HW_DIV 2 > + > +/* Register offsets */ > +#define REG_ENABLE 0x0 > +#define REG_FREQ_LUT 0x110 > +#define REG_PERF_STATE 0x920 > + > +#define OSM_L3_MAX_LINKS 1 > +#define SDM845_MAX_RSC_NODES 130 I'm nervous this define is going to fall out of date with qcom,sdm845.h. I'm worried someone will end up adding a few more nodes that were always there but previously hidden from Linux. Can we put this define in include/dt-bindings/interconnect/qcom,sdm845.h, so at least when that happens they'll come face to face with this define? The same comment goes for the SC7180 define in patch 4. On second thought, this trick only works once. Are we sure there aren't going to be other drivers that might want to tag on interconnect nodes as well? How about instead we just add the enum values below in qcom,sdm845.h as defines? -Evan
