The new callback get_scanout_position() reads the current location of
the scanout process. The operation is currentyl located in struct
drm_driver, but really belongs to the CRTC. Drivers will be converted
in separate patches.
v2:
* fix logical op in drm_calc_vbltimestamp_from_scanoutpos()
Signed-off-by: Thomas Zimmermann <tzimmermann@xxxxxxx>
Tested-by: Yannick Fertré <yannick.fertre@xxxxxx>
---
drivers/gpu/drm/drm_vblank.c | 24 ++++++++----
include/drm/drm_drv.h | 7 +---
include/drm/drm_modeset_helper_vtables.h | 47 ++++++++++++++++++++++++
3 files changed, 65 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c
index 1659b13b178c..3f1dd54cc8bb 100644
--- a/drivers/gpu/drm/drm_vblank.c
+++ b/drivers/gpu/drm/drm_vblank.c
@@ -30,6 +30,7 @@
#include <drm/drm_crtc.h>
#include <drm/drm_drv.h>
#include <drm/drm_framebuffer.h>
+#include <drm/drm_modeset_helper_vtables.h>
#include <drm/drm_print.h>
#include <drm/drm_vblank.h>
@@ -590,7 +591,7 @@ EXPORT_SYMBOL(drm_calc_timestamping_constants);
* Implements calculation of exact vblank timestamps from given drm_display_mode
* timings and current video scanout position of a CRTC. This can be directly
* used as the &drm_driver.get_vblank_timestamp implementation of a kms driver
- * if &drm_driver.get_scanout_position is implemented.
+ * if &drm_crtc_helper_funcs.get_scanout_position is implemented.
*
* The current implementation only handles standard video modes. For double scan
* and interlaced modes the driver is supposed to adjust the hardware mode
@@ -632,8 +633,9 @@ bool drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev,
}
/* Scanout position query not supported? Should not happen. */
- if (!dev->driver->get_scanout_position) {
- DRM_ERROR("Called from driver w/o get_scanout_position()!?\n");
+ if (!dev->driver->get_scanout_position &&
+ !crtc->helper_private->get_scanout_position) {
+ DRM_ERROR("Called from CRTC w/o get_scanout_position()!?\n");
return false;
}
@@ -664,11 +666,17 @@ bool drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev,
* Get vertical and horizontal scanout position vpos, hpos,
* and bounding timestamps stime, etime, pre/post query.
*/
- vbl_status = dev->driver->get_scanout_position(dev, pipe,
- in_vblank_irq,
- &vpos, &hpos,
- &stime, &etime,
- mode);
+ if (crtc->helper_private->get_scanout_position) {
+ vbl_status =
+ crtc->helper_private->get_scanout_position(
+ crtc, in_vblank_irq, &vpos, &hpos,
+ &stime, &etime, mode);
+ } else {
+ vbl_status =
+ dev->driver->get_scanout_position(
+ dev, pipe, in_vblank_irq, &vpos,
+ &hpos, &stime, &etime, mode);
+ }
/* Return as no-op if scanout query unsupported or failed. */
if (!vbl_status) {
diff --git a/include/drm/drm_drv.h b/include/drm/drm_drv.h
index cf13470810a5..d0049e5786fc 100644
--- a/include/drm/drm_drv.h
+++ b/include/drm/drm_drv.h
@@ -362,11 +362,8 @@ struct drm_driver {
* True on success, false if a reliable scanout position counter could
* not be read out.
*
- * FIXME:
- *
- * Since this is a helper to implement @get_vblank_timestamp, we should
- * move it to &struct drm_crtc_helper_funcs, like all the other
- * helper-internal hooks.
+ * This is deprecated and should not be used by new drivers.
+ * Use &drm_crtc_helper_funcs.get_scanout_position instead.
*/
bool (*get_scanout_position) (struct drm_device *dev, unsigned int pipe,
bool in_vblank_irq, int *vpos, int *hpos,
diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h
index 5a87f1bd7a3f..e398512bfd5f 100644
--- a/include/drm/drm_modeset_helper_vtables.h
+++ b/include/drm/drm_modeset_helper_vtables.h
@@ -450,6 +450,53 @@ struct drm_crtc_helper_funcs {
*/
void (*atomic_disable)(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state);
+
+ /**
+ * @get_scanout_position:
+ *
+ * Called by vblank timestamping code.
+ *
+ * Returns the current display scanout position from a CRTC and an
+ * optional accurate ktime_get() timestamp of when the position was
+ * measured. Note that this is a helper callback which is only used
+ * if a driver uses drm_calc_vbltimestamp_from_scanoutpos() for the
+ * @drm_driver.get_vblank_timestamp callback.
+ *
+ * Parameters:
+ *
+ * crtc:
+ * The CRTC.
+ * in_vblank_irq:
+ * True when called from drm_crtc_handle_vblank(). Some drivers
+ * need to apply some workarounds for gpu-specific vblank irq
+ * quirks if the flag is set.
+ * vpos:
+ * Target location for current vertical scanout position.
+ * hpos:
+ * Target location for current horizontal scanout position.
+ * stime:
+ * Target location for timestamp taken immediately before
+ * scanout position query. Can be NULL to skip timestamp.
+ * etime:
+ * Target location for timestamp taken immediately after
+ * scanout position query. Can be NULL to skip timestamp.
+ * mode:
+ * Current display timings.
+ *
+ * Returns vpos as a positive number while in active scanout area.
+ * Returns vpos as a negative number inside vblank, counting the number
+ * of scanlines to go until end of vblank, e.g., -1 means "one scanline
+ * until start of active scanout / end of vblank."
+ *
+ * Returns:
+ *
+ * True on success, false if a reliable scanout position counter could
+ * not be read out.
+ */
+ bool (*get_scanout_position)(struct drm_crtc *crtc,
+ bool in_vblank_irq, int *vpos, int *hpos,
+ ktime_t *stime, ktime_t *etime,
+ const struct drm_display_mode *mode);
};
/**
--
2.24.1
