The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a: Linux 5.5-rc1 (2019-12-08 14:57:55 -0800) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm64-for-5.6 for you to fetch changes up to f489b13dae02a0217b9702913074526d3669bdc8: arm64: dts: qcom: sdm845: move gpu zap nodes to per-device dts (2020-01-13 11:45:51 -0800) ---------------------------------------------------------------- Qualcomm ARM64 DT updates for v5.6 * Align SDM845 firmware paths with linux-firmware * Make WiFi work on Dragonboard845c * Wire up wakeup controller for SDM845 * Critical thermal interrupt support for SDM845, MSM8996 and MSM8998 * Enable UFS for SM8150 * Add remoteproc enablers and nodes for SM8150 * Add CPUfreq for SM8150 * Add RPMH power-domain node for SM8150 * Cleanup and refactor MSM8996 dts structure * Add initial Inforce Computing IFC6640 dts * Increase MSM8996 core voltage * Fix MSM8996 USB phy settings * Add missing alias for BLSP UART in MSM8998 MTP * Add remoteproc nodes for ADSP, modem and sensor core for MSM8998 * Enable WiFI for MSM8998 * Introduce the SC7180 platform and the IDP development board * Add CPUfreq, QUPs, USB, remoteproc etc for SC7180 * Enable USB OTG for Dragonboard 410c * Add vibrator motor node for PM8916 * Properly specify APCS clocks for MSM8916 * Add CPR and HFPLL for QCS404 * Enable full CPUfreq (with AVS) for QCS404 ---------------------------------------------------------------- Amit Kucheria (4): arm64: dts: sdm845: thermal: Add critical interrupt support arm64: dts: msm8916: thermal: Add interrupt support arm64: dts: msm8996: thermal: Add critical interrupt support arm64: dts: msm8998: thermal: Add critical interrupt support AngeloGioacchino Del Regno (1): arm64: dts: pm8004: Add SPMI regulator and add phandles to lsids Bjorn Andersson (15): arm64: dts: qcom: db845c: Enable ath10k 8bit host-cap quirk arm64: dts: qcom: db820c: Move non-soc entries out of /soc arm64: dts: qcom: msm8996: Use node references in db820c arm64: dts: qcom: msm8996: Move regulator consumers to db820c arm64: dts: qcom: msm8996: Move regulators to db820c arm64: dts: qcom: db820c: Group root nodes arm64: dts: qcom: db820c: Sort all nodes arm64: dts: qcom: db820c: Remove pin specific files arm64: dts: qcom: msm8996: Pad addresses arm64: dts: qcom: msm8996: Sort all nodes in msm8996.dtsi arm64: dts: qcom: db820c: Use regulator names from schematics arm64: dts: qcom: msm8996: Introduce IFC6640 arm64: dts: qcom: db845c: Move remoteproc firmware to sdm845 arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3 arm64: dts: qcom: sm8150: Hard code rpmhpd constants Douglas Anderson (9): arm64: dts: sc7180: Fix indentation/ordering of qspi nodes in sc7180-idp arm64: dts: sc7180: Add a comment to i2c7 about external pullup arm64: dts: qcom: sc7180: Add SoC name to compatible arm64: dts: qcom: sc7180: Rename gic-its node to msi-controller arm64: dts: qcom: sc7180: Add "#clock-cells" property to usb_1_ssphy arm64: dts: qcom: pm6150: Remove macro from unit name of adc-chan arm64: dts: qcom: sc7180: Avoid "phy" for USB QMP PHY wrapper arm64: dts: qcom: sc7180: Fix I2C/UART numbers 2, 4, 7, and 9 arm64: dts: qcom: sdm845: Rename gic-its node to msi-controller Jeffrey Hugo (6): arm64: dts: qcom: msm8998: Add anoc2 smmu node arm64: dts: qcom: msm8998: Add wifi node arm64: dts: qcom: msm8998: Fix tcsr syscon size arm64: dts: qcom: msm8998: Add gpucc node arm64: dts: qcom: msm8998: Fixup uart3 gpio config for bluetooth arm64: dts: msm8998-clamshell: Add pm8005_s1 regulator Jorge Ramirez-Ortiz (4): arm64: dts: qcom: msm8916: Add the clocks for the APCS mux/divider arm64: dts: qcom: qcs404: Add HFPLL node arm64: dts: qcom: qcs404: Add the clocks for APCS mux/divider arm64: dts: qcom: qcs404: Add DVFS support Kiran Gunda (3): arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals arm64: dts: qcom: sc7180-idp: Add RPMh regulators Lina Iyer (2): arm64: dts: qcom: add PDC interrupt controller for SDM845 arm64: dts: qcom: setup PDC as the wakeup parent for TLMM on SDM845 Loic Poulain (2): arm: dts: qcom: db410c: Enable USB OTG support arm64: dts: apq8096-db820c: Fix VDD core voltage Manu Gautam (1): arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core Matthias Kaehlcke (1): arm64: dts: qcom: sc7180: Fix node order Maulik Shah (4): arm64: dts: qcom: sc7180: Add cmd_db reserved area arm64: dts: qcom: sc7180: Add rpmh-rsc node arm64: dts: qcom: sc7180: Add pdc interrupt controller arm64: dts: qcom: sc7180: Add wakeup parent for TLMM Niklas Cassel (2): arm64: dts: qcom: qcs404: Add CPR and populate OPP table arm64: dts: qcom: qcs404-evb: Set vdd_apc regulator in high power mode Rajendra Nayak (4): dt-bindings: qcom: Add SC7180 bindings arm64: dts: sc7180: Add minimal dts/dtsi files for SC7180 soc arm64: dts: sc7180: Remove additional spi chip select muxes arm64: dts: sc7180: Add aliases for all i2c and spi devices Rajeshwari (2): arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180 arm64: dts: qcom: sc7180: Add critical interrupt and cooling maps for TSENS in SC7180 Rob Clark (1): arm64: dts: qcom: sdm845: move gpu zap nodes to per-device dts Roja Rani Yarubandi (1): arm64: dts: sc7180: Add qupv3_0 and qupv3_1 Sai Prakash Ranjan (5): arm64: dts: sdm845: Update the device tree node for LLCC arm64: dts: qcom: sc7180: Add APSS watchdog node arm64: dts: qcom: sm8150: Add APSS watchdog node arm64: dts: qcom: sc7180: Add Last level cache controller node arm64: dts: qcom: qcs404: Update the compatible for watchdog timer Sandeep Maheswaram (1): arm64: dts: qcom: sc7180: Add USB related nodes Sibi Sankar (8): arm64: dts: sm8150: Add rpmh power-domain node arm64: dts: qcom: sm8150: Add ADSP, CDSP, MPSS and SLPI smp2p arm64: dts: qcom: sm8150: Add ADSP, CDSP, MPSS and SLPI remoteprocs arm64: dts: qcom: sm8150: Add cpufreq HW device node arm64: dts: qcom: sc7180: Add remoteproc enablers arm64: dts: qcom: msm8998: Update reserved memory map arm64: dts: qcom: msm8998: Add ADSP, MPSS and SLPI nodes arm64: dts: qcom: sc7180: Add rpmh power-domain node Stanimir Varbanov (1): arm64: dts: qcom: msm8996: Fix venus iommu nodename error Stephan Gerhold (1): arm64: dts: qcom: pm8916: Add vibration motor node Stephen Boyd (1): arm64: dts: qcom: sdm845-cheza: Add cr50 spi node Taniya Das (2): arm64: dts: qcom: SC7180: Add node for rpmhcc clock driver arm64: dts: sc7180: Add cpufreq HW node for cpu scaling Vinod Koul (6): arm64: dts: qcom: Use gcc clock enums arm64: dts: qcom: sm8150: Add ufs nodes arm64: dts: qcom: sm8150-mtp: Enable UFS nodes arm64: dts: qcom: sm8150-mtp: Add UFS gpio reset arm64: dts: qcom: sm8150: Fix UFS phy register size arm64: dts: qcom: sdm845: add the ufs reset Vivek Gautam (1): arm64: dts: sc7180: Add device node for apps_smmu Documentation/devicetree/bindings/arm/qcom.yaml | 44 +- arch/arm64/boot/dts/qcom/Makefile | 2 + .../arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi | 19 + arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 11 +- arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi | 109 - .../boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi | 92 - arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 1408 +++++--- arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts | 385 +++ arch/arm64/boot/dts/qcom/msm8916.dtsi | 5 +- arch/arm64/boot/dts/qcom/msm8996.dtsi | 3530 ++++++++++---------- arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 49 + arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 41 + arch/arm64/boot/dts/qcom/msm8998-pins.dtsi | 25 +- arch/arm64/boot/dts/qcom/msm8998.dtsi | 262 +- arch/arm64/boot/dts/qcom/pm6150.dtsi | 72 + arch/arm64/boot/dts/qcom/pm6150l.dtsi | 31 + arch/arm64/boot/dts/qcom/pm8004.dtsi | 10 +- arch/arm64/boot/dts/qcom/pm8916.dtsi | 6 + arch/arm64/boot/dts/qcom/pm8994.dtsi | 4 + arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 1 + arch/arm64/boot/dts/qcom/qcs404.dtsi | 160 +- arch/arm64/boot/dts/qcom/sc7180-idp.dts | 430 +++ arch/arm64/boot/dts/qcom/sc7180.dtsi | 2187 ++++++++++++ arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 15 +- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 18 +- arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 7 + arch/arm64/boot/dts/qcom/sdm845.dtsi | 32 +- .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 7 + arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 35 + arch/arm64/boot/dts/qcom/sm8150.dtsi | 391 ++- 30 files changed, 6766 insertions(+), 2622 deletions(-) delete mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi delete mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi create mode 100644 arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts create mode 100644 arch/arm64/boot/dts/qcom/pm6150.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm6150l.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-idp.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180.dtsi
