The patch regulator: add IPQ4019 SDHCI VQMMC LDO driver has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.6 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From ebf652b408200504194be32ad0a3f5bb49d6000a Mon Sep 17 00:00:00 2001 From: Robert Marko <robert.marko@xxxxxxxxxx> Date: Sun, 12 Jan 2020 12:30:01 +0100 Subject: [PATCH] regulator: add IPQ4019 SDHCI VQMMC LDO driver This introduces the IPQ4019 VQMMC LDO driver needed for the SD/EMMC driver I/O level operation. This will enable introducing SD/EMMC support for the built-in controller. Signed-off-by: Mantas Pucka <mantas@xxxxxxxxxxxx> Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx> Link: https://lore.kernel.org/r/20200112113003.11110-1-robert.marko@xxxxxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/regulator/Kconfig | 7 ++ drivers/regulator/Makefile | 1 + drivers/regulator/vqmmc-ipq4019-regulator.c | 111 ++++++++++++++++++++ 3 files changed, 119 insertions(+) create mode 100644 drivers/regulator/vqmmc-ipq4019-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 9fe2aa9fbbc1..97bfdd47954f 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -1110,6 +1110,13 @@ config REGULATOR_VEXPRESS This driver provides support for voltage regulators available on the ARM Ltd's Versatile Express platform. +config REGULATOR_VQMMC_IPQ4019 + tristate "IPQ4019 VQMMC SD LDO regulator support" + depends on ARCH_QCOM + help + This driver provides support for the VQMMC LDO I/0 + voltage regulator of the IPQ4019 SD/EMMC controller. + config REGULATOR_WM831X tristate "Wolfson Microelectronics WM831x PMIC regulators" depends on MFD_WM831X diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index b8c9072f8500..07bc977c52b0 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -135,6 +135,7 @@ obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o twl6030-regulator.o obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o +obj-$(CONFIG_REGULATOR_VQMMC_IPQ4019) += vqmmc-ipq4019-regulator.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o diff --git a/drivers/regulator/vqmmc-ipq4019-regulator.c b/drivers/regulator/vqmmc-ipq4019-regulator.c new file mode 100644 index 000000000000..dae16094d3a2 --- /dev/null +++ b/drivers/regulator/vqmmc-ipq4019-regulator.c @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (c) 2019 Mantas Pucka <mantas@xxxxxxxxxxxx> +// Copyright (c) 2019 Robert Marko <robert.marko@xxxxxxxxxx> +// +// Driver for IPQ4019 SD/MMC controller's I/O LDO voltage regulator + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> + +static const unsigned int ipq4019_vmmc_voltages[] = { + 1500000, 1800000, 2500000, 3000000, +}; + +static struct regulator_ops ipq4019_regulator_voltage_ops = { + .list_voltage = regulator_list_voltage_table, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, +}; + +static struct regulator_desc vmmc_regulator = { + .name = "vmmcq", + .ops = &ipq4019_regulator_voltage_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .volt_table = ipq4019_vmmc_voltages, + .n_voltages = ARRAY_SIZE(ipq4019_vmmc_voltages), + .vsel_reg = 0, + .vsel_mask = 0x3, +}; + +const struct regmap_config ipq4019_vmmcq_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, +}; + +static int ipq4019_regulator_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regulator_init_data *init_data; + struct regulator_config cfg = {}; + struct regulator_dev *rdev; + struct resource *res; + struct regmap *rmap; + void __iomem *base; + + init_data = of_get_regulator_init_data(dev, dev->of_node, + &vmmc_regulator); + if (!init_data) + return -EINVAL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + rmap = devm_regmap_init_mmio(dev, base, &ipq4019_vmmcq_regmap_config); + if (IS_ERR(rmap)) + return PTR_ERR(rmap); + + cfg.dev = dev; + cfg.init_data = init_data; + cfg.of_node = dev->of_node; + cfg.regmap = rmap; + + rdev = devm_regulator_register(dev, &vmmc_regulator, &cfg); + if (IS_ERR(rdev)) { + dev_err(dev, "Failed to register regulator: %ld\n", + PTR_ERR(rdev)); + return PTR_ERR(rdev); + } + platform_set_drvdata(pdev, rdev); + + return 0; +} + +static int ipq4019_regulator_remove(struct platform_device *pdev) +{ + struct regulator_dev *rdev = platform_get_drvdata(pdev); + + regulator_unregister(rdev); + + return 0; +} + +static const struct of_device_id regulator_ipq4019_of_match[] = { + { .compatible = "qcom,vqmmc-ipq4019-regulator", }, + {}, +}; + +static struct platform_driver ipq4019_regulator_driver = { + .probe = ipq4019_regulator_probe, + .remove = ipq4019_regulator_remove, + .driver = { + .name = "vqmmc-ipq4019-regulator", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(regulator_ipq4019_of_match), + }, +}; +module_platform_driver(ipq4019_regulator_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mantas Pucka <mantas@xxxxxxxxxxxx>"); +MODULE_DESCRIPTION("IPQ4019 VQMMC voltage regulator"); -- 2.20.1
