Re: [PATCH v5 0/4] usb: xhci: Add support for Renesas USB controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8.1.2020 8.24, Greg Kroah-Hartman wrote:
On Wed, Jan 08, 2020 at 09:37:07AM +0530, Vinod Koul wrote:
Hi John,

On 07-01-20, 11:51, John Stultz wrote:
On Wed, Nov 6, 2019 at 12:40 AM Vinod Koul <vkoul@xxxxxxxxxx> wrote:

This series add support for Renesas USB controllers uPD720201 and uPD720202.
These require firmware to be loaded and in case devices have ROM those can
also be programmed if empty. If ROM is programmed, it runs from ROM as well.

This includes two patches from Christian which supported these controllers
w/o ROM and later my patches for ROM support and multiple firmware versions.


Hey Vinod!
    In pushing this series to one of the Android trees for the db845c,
there was some concern raised that this series is adding a lot of
renesas specific logic to the more generic xhci-pci driver. There was
some question if instead that logic should be added to its own
file/module? Do you have any thoughts on this?

TBH I have not thought about that and in previous post neither Greg or
Mathias gave a feedback that this was not acceptable...

We can think about splitting but apart from firmware load there is not
much extra functionality that we need to add, the controller behaviour
as a standard xhci-pci. So i am not sure if we gain much by splitting.

Also, It seems there hasn't been much feedback on this for a few
months now. Is there a newer version of the patchset I should sync
with? Do you have plans to resubmit soon?

Well am still waiting for feedback :( I dont have any update on top of
this, I can repost but I dont think that really serves a purpose.

I would really like to hear from Greg if this series is acceptable and
if not what would he like to see changed.

Greg is not the xhci maintainer :)


Reviewing this always got bumped down on my todo list as other urgent issues
came up.

I think the concern about adding this amount of renesas specific code to
xhci-pci.c is valid. This series adds over 900 lines of Renesas FW loading
code to a 600 line xhci-pci.c
-Mathias



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux