Re: [PATCH v2 1/8] dt-bindings: remoteproc: Add Qualcomm PIL info binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat 04 Jan 13:38 PST 2020, Rob Herring wrote:

> On Thu, Dec 26, 2019 at 09:32:08PM -0800, Bjorn Andersson wrote:
> > Add a devicetree binding for the Qualcomm periperal image loader
> > relocation info region found in the IMEM.
> > 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > ---
> > 
> > Changes since v1:
> > - New patch
> > 
> >  .../bindings/remoteproc/qcom,pil-info.yaml    | 35 +++++++++++++++++++
> >  1 file changed, 35 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> > new file mode 100644
> > index 000000000000..715945c683ed
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> > @@ -0,0 +1,35 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/remoteproc/qcom,pil-info.yaml#";
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> > +
> > +title: Qualcomm peripheral image loader relocation info binding
> > +
> > +description:
> > +  This document defines the binding for describing the Qualcomm peripheral
> > +  image loader relocation memory region, in IMEM, which is used for post mortem
> > +  debugging of remoteprocs.
> > +
> > +maintainers:
> > +  - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > +
> > +properties:
> > +  compatible:
> > +    const: qcom,pil-reloc-info
> > +
> > +  offset:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description: Offset in the register map for the memory region
> 
> Why not use 'reg' instead?
> 

Because we have one prior example of subdevice of "imem", which is
compatible "syscon-reboot-mode" and that binding uses "offset".

That said, if you insist, reg (and ranges) would allow us to express the
size of the region...

Regards,
Bjorn

> > +
> > +examples:
> > +  - |
> > +    imem@146bf000 {
> > +      compatible = "syscon", "simple-mfd";
> > +      reg = <0 0x146bf000 0 0x1000>;
> > +
> > +      pil-reloc {
> > +        compatible ="qcom,pil-reloc-info";
> > +        offset = <0x94c>;
> > +      };
> > +    };
> > -- 
> > 2.24.0
> > 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux