On Sun 22 Dec 16:27 PST 2019, Victhor Foster wrote:
> This patch removes all instances of IRQ_TYPE_NONE, which fixes warning messages during boot. It also changes interrupt types to their corresponding macros, as defined in arm-gic.h.
>
> Signed-off by: Victhor Foster <victhor.foster@xxxxxxx>
Thanks for fixing this up Victhor. I've applied both patches, with the
commit message wrapped to 72 chars.
Regards,
Bjorn
> ---
> arch/arm/boot/dts/qcom-apq8084.dtsi | 40 ++++++++++++++---------------
> 1 file changed, 20 insertions(+), 20 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
> index 0a0fb147ebb9..1724a87afc4f 100644
> --- a/arch/arm/boot/dts/qcom-apq8084.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
> @@ -1,6 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0
> /dts-v1/;
>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/clock/qcom,gcc-apq8084.h>
> #include <dt-bindings/gpio/gpio.h>
>
> @@ -184,7 +185,7 @@ cpu_crit3: trip1 {
>
> cpu-pmu {
> compatible = "qcom,krait-pmu";
> - interrupts = <1 7 0xf04>;
> + interrupts = <GIC_PPI 7 0xf04>;
> };
>
> clocks {
> @@ -203,10 +204,10 @@ sleep_clk: sleep_clk {
>
> timer {
> compatible = "arm,armv7-timer";
> - interrupts = <1 2 0xf08>,
> - <1 3 0xf08>,
> - <1 4 0xf08>,
> - <1 1 0xf08>;
> + interrupts = <GIC_PPI 2 0xf08>,
> + <GIC_PPI 3 0xf08>,
> + <GIC_PPI 4 0xf08>,
> + <GIC_PPI 1 0xf08>;
> clock-frequency = <19200000>;
> };
>
> @@ -258,7 +259,6 @@ tsens: thermal-sensor@fc4a8000 {
> nvmem-cell-names = "calib", "calib_backup";
> #thermal-sensor-cells = <1>;
> };
> -
> timer@f9020000 {
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -269,50 +269,50 @@ timer@f9020000 {
>
> frame@f9021000 {
> frame-number = <0>;
> - interrupts = <0 8 0x4>,
> - <0 7 0x4>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> reg = <0xf9021000 0x1000>,
> <0xf9022000 0x1000>;
> };
>
> frame@f9023000 {
> frame-number = <1>;
> - interrupts = <0 9 0x4>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> reg = <0xf9023000 0x1000>;
> status = "disabled";
> };
>
> frame@f9024000 {
> frame-number = <2>;
> - interrupts = <0 10 0x4>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> reg = <0xf9024000 0x1000>;
> status = "disabled";
> };
>
> frame@f9025000 {
> frame-number = <3>;
> - interrupts = <0 11 0x4>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> reg = <0xf9025000 0x1000>;
> status = "disabled";
> };
>
> frame@f9026000 {
> frame-number = <4>;
> - interrupts = <0 12 0x4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> reg = <0xf9026000 0x1000>;
> status = "disabled";
> };
>
> frame@f9027000 {
> frame-number = <5>;
> - interrupts = <0 13 0x4>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> reg = <0xf9027000 0x1000>;
> status = "disabled";
> };
>
> frame@f9028000 {
> frame-number = <6>;
> - interrupts = <0 14 0x4>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> reg = <0xf9028000 0x1000>;
> status = "disabled";
> };
> @@ -404,13 +404,13 @@ tlmm: pinctrl@fd510000 {
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - interrupts = <0 208 0>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> blsp2_uart2: serial@f995e000 {
> compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> reg = <0xf995e000 0x1000>;
> - interrupts = <0 114 0x0>;
> + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
> clock-names = "core", "iface";
> status = "disabled";
> @@ -420,7 +420,7 @@ sdhci@f9824900 {
> compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
> reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
> reg-names = "hc_mem", "core_mem";
> - interrupts = <0 123 0>, <0 138 0>;
> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "hc_irq", "pwr_irq";
> clocks = <&gcc GCC_SDCC1_APPS_CLK>,
> <&gcc GCC_SDCC1_AHB_CLK>,
> @@ -433,7 +433,7 @@ sdhci@f98a4900 {
> compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
> reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
> reg-names = "hc_mem", "core_mem";
> - interrupts = <0 125 0>, <0 221 0>;
> + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "hc_irq", "pwr_irq";
> clocks = <&gcc GCC_SDCC2_APPS_CLK>,
> <&gcc GCC_SDCC2_AHB_CLK>,
> @@ -449,7 +449,7 @@ spmi_bus: spmi@fc4cf000 {
> <0xfc4cb000 0x1000>,
> <0xfc4ca000 0x1000>;
> interrupt-names = "periph_irq";
> - interrupts = <0 190 0>;
> + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
> qcom,ee = <0>;
> qcom,channel = <0>;
> #address-cells = <2>;
> @@ -463,7 +463,7 @@ smd {
> compatible = "qcom,smd";
>
> rpm {
> - interrupts = <0 168 1>;
> + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> qcom,ipc = <&apcs 8 0>;
> qcom,smd-edge = <15>;
>
> --
> 2.24.0
