Hi Bjorn,
On 12/27/19 3:27 AM, Bjorn Andersson wrote:
> There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit
> the fixup to only affect the relevant PCIe bridges.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
>
> Stan, I picked up all the suggested device id's from the previous thread and
> added 0x1000 for QCS404. I looked at creating platform specific defines in
> pci_ids.h, but SDM845 has both 106 and 107... Please let me know if you would
> prefer that I do this anyway.
Looks good,
Acked-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
>
> drivers/pci/controller/dwc/pcie-qcom.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 5ea527a6bd9f..138e1a2d21cc 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1439,7 +1439,13 @@ static void qcom_fixup_class(struct pci_dev *dev)
> {
> dev->class = PCI_CLASS_BRIDGE_PCI << 8;
> }
> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class);
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class);
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class);
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class);
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class);
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class);
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class);
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class);
>
> static struct platform_driver qcom_pcie_driver = {
> .probe = qcom_pcie_probe,
>
--
regards,
Stan
