[PATCH 1/2] arm64: dts: qcom: sc7180: Add critical interrupt and cooling maps for TSENS in SC7180.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Rajeshwari <rkambl@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 289 +++++++++++++++++++++++++++++------
 1 file changed, 239 insertions(+), 50 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 3676bfd..e419ca0 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -78,6 +79,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_0: l2-cache {
 				compatible = "cache";
@@ -94,6 +96,7 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_100>;
+			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_100: l2-cache {
 				compatible = "cache";
@@ -107,6 +110,7 @@
 			reg = <0x0 0x200>;
 			enable-method = "psci";
 			next-level-cache = <&L2_200>;
+			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_200: l2-cache {
 				compatible = "cache";
@@ -120,6 +124,7 @@
 			reg = <0x0 0x300>;
 			enable-method = "psci";
 			next-level-cache = <&L2_300>;
+			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_300: l2-cache {
 				compatible = "cache";
@@ -133,6 +138,7 @@
 			reg = <0x0 0x400>;
 			enable-method = "psci";
 			next-level-cache = <&L2_400>;
+			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_400: l2-cache {
 				compatible = "cache";
@@ -146,6 +152,7 @@
 			reg = <0x0 0x500>;
 			enable-method = "psci";
 			next-level-cache = <&L2_500>;
+			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_500: l2-cache {
 				compatible = "cache";
@@ -159,6 +166,7 @@
 			reg = <0x0 0x600>;
 			enable-method = "psci";
 			next-level-cache = <&L2_600>;
+			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_600: l2-cache {
 				compatible = "cache";
@@ -172,6 +180,7 @@
 			reg = <0x0 0x700>;
 			enable-method = "psci";
 			next-level-cache = <&L2_700>;
+			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_700: l2-cache {
 				compatible = "cache";
@@ -1058,8 +1067,9 @@
 			reg = <0 0x0c263000 0 0x1ff>, /* TM */
 				<0 0x0c222000 0 0x1ff>; /* SROT */
 			#qcom,sensors = <15>;
-			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -1068,8 +1078,9 @@
 			reg = <0 0x0c265000 0 0x1ff>, /* TM */
 				<0 0x0c223000 0 0x1ff>; /* SROT */
 			#qcom,sensors = <10>;
-			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -1301,277 +1312,455 @@
 	};
 
 	thermal-zones {
-		cpu0-thermal {
+		cpu_0_0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
-				cpu0_alert0: trip-point0 {
+				cpu_0_0_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu0_alert1: trip-point1 {
+				cpu_0_0_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu0_crit: cpu_crit {
+				cpu_0_0_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_0_0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_0_0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu1-thermal {
+		cpu_0_1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
-				cpu1_alert0: trip-point0 {
+				cpu_0_1_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu1_alert1: trip-point1 {
+				cpu_0_1_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu1_crit: cpu_crit {
+				cpu_0_1_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_0_1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_0_1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu2-thermal {
+		cpu_0_2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
-				cpu2_alert0: trip-point0 {
+				cpu_0_2_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu2_alert1: trip-point1 {
+				cpu_0_2_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu2_crit: cpu_crit {
+				cpu_0_2_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_0_2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_0_2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu3-thermal {
+		cpu_0_3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
-				cpu3_alert0: trip-point0 {
+				cpu_0_3_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu3_alert1: trip-point1 {
+				cpu_0_3_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu3_crit: cpu_crit {
+				cpu_0_3_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_0_3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_0_3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu4-thermal {
+		cpu_0_4-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
-				cpu4_alert0: trip-point0 {
+				cpu_0_4_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu4_alert1: trip-point1 {
+				cpu_0_4_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu4_crit: cpu_crit {
+				cpu_0_4_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_0_4_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_0_4_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu5-thermal {
+		cpu_0_5-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
-				cpu5_alert0: trip-point0 {
+				cpu_0_5_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu5_alert1: trip-point1 {
+				cpu_0_5_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu5_crit: cpu_crit {
+				cpu_0_5_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_0_5_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_0_5_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu6-thermal {
+		cpu_1_0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
-				cpu6_alert0: trip-point0 {
+				cpu_1_0_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu6_alert1: trip-point1 {
+				cpu_1_0_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu6_crit: cpu_crit {
+				cpu_1_0_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_1_0_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_1_0_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu7-thermal {
+		cpu_1_1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
-				cpu7_alert0: trip-point0 {
+				cpu_1_1_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu7_alert1: trip-point1 {
+				cpu_1_1_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu7_crit: cpu_crit {
+				cpu_1_1_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_1_1_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_1_1_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu8-thermal {
+		cpu_1_2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 11>;
 
 			trips {
-				cpu8_alert0: trip-point0 {
+				cpu_1_2_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu8_alert1: trip-point1 {
+				cpu_1_2_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu8_crit: cpu_crit {
+				cpu_1_2_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_1_2_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_1_2_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu9-thermal {
+		cpu_1_3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
-				cpu9_alert0: trip-point0 {
+				cpu_1_3_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu9_alert1: trip-point1 {
+				cpu_1_3_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu9_crit: cpu_crit {
+				cpu_1_3_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_1_3_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_1_3_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		aoss0-thermal {
+		aoss_0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -1586,7 +1775,7 @@
 			};
 		};
 
-		cpuss0-thermal {
+		cpuss_0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -1606,7 +1795,7 @@
 			};
 		};
 
-		cpuss1-thermal {
+		cpuss_1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -1626,7 +1815,7 @@
 			};
 		};
 
-		gpuss0-thermal {
+		gpuss_0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -1641,7 +1830,7 @@
 			};
 		};
 
-		gpuss1-thermal {
+		gpuss_1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -1656,7 +1845,7 @@
 			};
 		};
 
-		aoss1-thermal {
+		aoss_1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux