On Tue 17 Dec 08:54 PST 2019, Jeffrey Hugo wrote:
> It turns out booting the modem is dependent on a bimc vote from Linux on
> msm8998. To make the modem happy, add the bimc clock to rely on the
> default vote from rpmcc. Once we have interconnect support, bimc should
> be controlled properly.
>
> Fixes: 6131dc81211c ("clk: qcom: smd: Add support for MSM8998 rpm clocks")
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@xxxxxxxxx>
> ---
> drivers/clk/qcom/clk-smd-rpm.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
> index 930fa4a4c52a..e5c3db11bf26 100644
> --- a/drivers/clk/qcom/clk-smd-rpm.c
> +++ b/drivers/clk/qcom/clk-smd-rpm.c
> @@ -648,6 +648,7 @@ static const struct rpm_smd_clk_desc rpm_clk_qcs404 = {
> };
>
> /* msm8998 */
> +DEFINE_CLK_SMD_RPM(msm8998, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
> DEFINE_CLK_SMD_RPM(msm8998, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
> DEFINE_CLK_SMD_RPM(msm8998, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
> DEFINE_CLK_SMD_RPM(msm8998, cnoc_clk, cnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2);
> @@ -671,6 +672,8 @@ DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk2_pin, rf_clk2_a_pin, 5);
> DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, rf_clk3, rf_clk3_a, 6);
> DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk3_pin, rf_clk3_a_pin, 6);
> static struct clk_smd_rpm *msm8998_clks[] = {
> + [RPM_SMD_BIMC_CLK] = &msm8998_bimc_clk,
> + [RPM_SMD_BIMC_A_CLK] = &msm8998_bimc_a_clk,
> [RPM_SMD_PCNOC_CLK] = &msm8998_pcnoc_clk,
> [RPM_SMD_PCNOC_A_CLK] = &msm8998_pcnoc_a_clk,
> [RPM_SMD_SNOC_CLK] = &msm8998_snoc_clk,
> --
> 2.17.1
>
