Hi,
On Mon, Dec 16, 2019 at 1:16 PM Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:
>
> Add the cr50 device to the spi controller it is attached to. This
> enables /dev/tpm0 and some login things on Cheza.
>
> Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> index 9a4ff57fc877..f6683460dc82 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> @@ -651,6 +651,20 @@ &spi0 {
> status = "okay";
> };
>
> +&spi5 {
> + status = "okay";
> +
> + cr50@0 {
Between v2 and v3 of your upstream bindings you changed this from
"cr50@0" to "tpm@0" in the example. I'm going to assume you did that
for some reason and you should be matching the binding example here.
...or you should change the binding example to be cr50@.
> + compatible = "google,cr50";
> + reg = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&h1_ap_int_odl>;
> + spi-max-frequency = <800000>;
> + interrupt-parent = <&tlmm>;
> + interrupts = <129 IRQ_TYPE_EDGE_RISING>;
Certainly we need an interrupt, but I don't see it in the bindings.
Any idea why it isn't there?
-Doug
