On Thu, Dec 05, 2019 at 11:07:05PM -0800, Bjorn Andersson wrote: > On Thu 05 Dec 08:15 PST 2019, Paolo Pisati wrote: > > > This reverts commit 14ced7e3a1ae9bed7051df3718c8c7b583854a5c. > > > > Signed-off-by: Paolo Pisati <p.pisati@xxxxxxxxx> > > Thanks for the patch Paolo, but reverting this commit means we're > checking for the wrong status bit and thereby relies on timing of that > bit having an appropriate value again. > > The problem at hand seems to be that some resources are missing while > trying to initialize the PHY, which causes it to not become ready. I saw > the same problem when bringing up PCIe on SDM845, but failed to validate > MSM8996, as this was not booting since mid-summer. > > I verified that this is the case by applying: > https://lore.kernel.org/linux-arm-msm/20191107000917.1092409-4-bjorn.andersson@xxxxxxxxxx/ Thanks Bjorn, indeed replacing the revert and leaving the rest of the series intact, my db820c boots fine. One thing though - i removed the =y config changes, and now the board crash while, it appears, powering on qmp-phy - no stacktrace, unfortunately: ... [ OK ] Reached target Local File Systems (Pre). Starting Flush Journal to Persistent Storage... [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Coldplug all Devices. [ OK ] Started udev Kernel Device Manager. [ 13.550757] dwc3 7600000.dwc3: Failed to get clk 'ref': -2 [ 13.552251] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2 [ 13.580749] dwc3 7600000.dwc3: Failed to get clk 'ref': -2 [ 13.582802] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2 [ 13.595811] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2 [ 13.596502] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 13.636319] ufshcd-qcom 624000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517 [ 13.638919] ufshcd-qcom 624000.ufshc: Initialization failed [ OK ] Found device /dev/ttyMSM0. [ 13.675328] ufshcd-qcom 624000.ufshc: ufshcd_pltfrm_init() failed -517 [ 13.693300] qcom-qmp-phy 34000.phy: phy common block init timed-out [ 13.693390] phy phy-34000.phy.2: phy poweron failed --> -110 [ 13.698831] qcom-pcie 600000.pcie: cannot initialize host Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.XF.1.0-00301 S - IMAGE_VARIANT_STRING=M8996LAB S - OEM_IMAGE_VERSION_STRING=crm-ubuntu68 S - Boot Interface: UFS S - Secure Boot: Off ... - bye, p.
