This adds DT bindings for Kryo EDAC implemented with RAS
extensions on KRYO{3,4}XX CPU cores for reporting of cache
errors.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
---
.../bindings/edac/qcom-kryo-edac.yaml | 67 +++++++++++++++++++
1 file changed, 67 insertions(+)
create mode 100644 Documentation/devicetree/bindings/edac/qcom-kryo-edac.yaml
diff --git a/Documentation/devicetree/bindings/edac/qcom-kryo-edac.yaml b/Documentation/devicetree/bindings/edac/qcom-kryo-edac.yaml
new file mode 100644
index 000000000000..1a39429a73b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/qcom-kryo-edac.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/qcom-kryo-edac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kryo Error Detection and Correction(EDAC)
+
+maintainers:
+ - Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
+
+description: |
+ Kryo EDAC is defined to describe on-chip error detection and correction
+ for the Kryo CPU cores which implement RAS extensions. It will report
+ all Single Bit Errors and Double Bit Errors found in L1/L2 caches in
+ in two registers ERXSTATUS_EL1 and ERXMISC0_EL1. L3-SCU cache errors
+ are reported in ERR1STATUS and ERR1MISC0 registers.
+ ERXSTATUS_EL1 - Selected Error Record Primary Status Register, EL1
+ ERXMISC0_EL1 - Selected Error Record Miscellaneous Register 0, EL1
+ ERR1STATUS - Error Record Primary Status Register
+ ERR1MISC0 - Error Record Miscellaneous Register 0
+ Current implementation of Kryo ECC(Error Correcting Code) mechanism is
+ based on interrupts.
+
+properties:
+ compatible:
+ enum:
+ - qcom,kryo-edac
+
+ interrupts:
+ minItems: 1
+ maxItems: 4
+ items:
+ - description: l1-l2 cache faultirq interrupt
+ - description: l1-l2 cache errirq interrupt
+ - description: l3-scu cache errirq interrupt
+ - description: l3-scu cache faultirq interrupt
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 4
+ items:
+ - const: l1-l2-faultirq
+ - const: l1-l2-errirq
+ - const: l3-scu-errirq
+ - const: l3-scu-faultirq
+
+required:
+ - compatible
+ - interrupts
+ - interrupt-names
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ kryo_edac {
+ compatible = "qcom,kryo-edac";
+ interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "l1-l2-faultirq",
+ "l1-l2-errirq",
+ "l3-scu-errirq",
+ "l3-scu-faultirq";
+ };
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
