TSENS IP v2.x supports critical interrupts and v2.3+ adds watchdog support in case the FSM is stuck. Enable support in the driver. This series was generated on top of linux-next from 20191202 to capture const changes for msm8976 that is queued currently. Changes from v1: - Make tsens_features non-const to allow run time detection of features - Pass tsens_sensor around as a const - Fix a bug to release dev pointer in success path - Address review comments from Bjorn and Stephen (thanks for the review) - Add msm8998 and msm8996 DTSI changes for critical interrupts Amit Kucheria (9): drivers: thermal: tsens: De-constify struct tsens_features drivers: thermal: tsens: Pass around struct tsens_sensor as a constant drivers: thermal: tsens: use simpler variables drivers: thermal: tsens: Release device in success path drivers: thermal: tsens: Add critical interrupt support drivers: thermal: tsens: Add watchdog support arm64: dts: sdm845: thermal: Add critical interrupt support arm64: dts: msm8996: thermal: Add critical interrupt support arm64: dts: msm8998: thermal: Add critical interrupt support arch/arm64/boot/dts/qcom/msm8996.dtsi | 10 +- arch/arm64/boot/dts/qcom/msm8998.dtsi | 10 +- arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 +- drivers/thermal/qcom/tsens-8960.c | 4 +- drivers/thermal/qcom/tsens-common.c | 188 +++++++++++++++++++++++--- drivers/thermal/qcom/tsens-v0_1.c | 6 +- drivers/thermal/qcom/tsens-v1.c | 6 +- drivers/thermal/qcom/tsens-v2.c | 24 +++- drivers/thermal/qcom/tsens.c | 26 +++- drivers/thermal/qcom/tsens.h | 104 ++++++++++++-- 10 files changed, 332 insertions(+), 56 deletions(-) -- 2.17.1
