[PATCH V3 00/10] remoteproc: qcom: q6v5-wcss: Add support for secure pil

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



IPQ8074 needs support for secure pil as well.
Also, currently only unified firmware is supported.
IPQ8074 supports split firmware for q6 and m3, so
adding support for that.

Also, this series is based on Govind’s,
“[v5] Add non PAS wcss Q6 support for QCS404”
https://patchwork.kernel.org/cover/11060629/

[V3] Fixed all comments.

Gokul Sriram Palanisamy (10):
  remoteproc: qcom: Add PRNG proxy clock
  remoteproc: qcom: Add secure PIL support
  remoteproc: qcom: Add support for split q6 + m3 wlan firmware
  remoteproc: qcom: Add ssr subdevice identifier
  remoteproc: qcom: Update regmap offsets for halt register
  dt-bindings: clock: qcom: Add reset for WCSSAON
  clk: qcom: Add WCSSAON reset
  dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC
  arm64: dts: Add support for scm on IPQ8074 SoCs
  arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC

 .../devicetree/bindings/firmware/qcom,scm.txt      |   1 +
 arch/arm64/boot/dts/qcom/ipq8074.dtsi              | 127 +++++++++++++++++
 drivers/clk/qcom/gcc-ipq8074.c                     |   1 +
 drivers/remoteproc/qcom_q6v5_wcss.c                | 155 ++++++++++++++++-----
 include/dt-bindings/clock/qcom,gcc-ipq8074.h       |   1 +
 5 files changed, 254 insertions(+), 31 deletions(-)

-- 
1.9.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux