Re: [PATCH v3] msm:disp:dpu1: add support for display for SC7180 target

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 20, 2019 at 05:49:28PM +0530, Kalyan Thota wrote:
> Add display hw catalog changes for SC7180 target.
> 
> Changes in v1:
>  - Configure register offsets and capabilities for the
>    display hw blocks.
> 
> Changes in v2:
>  - mdss_irq data type has changed in the dependent
>    patch, accommodate the necessary changes.
>  - Add co-developed-by tags in the commit msg (Stephen Boyd).
> 
> Changes in v3:
>  - fix kernel checkpatch errors in v2

But not the one telling you to split bindings to separate patch?

> 
> This patch has dependency on the below series
> 
> https://patchwork.kernel.org/patch/11253647/
> 
> Co-developed-by: Shubhashree Dhar <dhar@xxxxxxxxxxxxxx>
> Signed-off-by: Shubhashree Dhar <dhar@xxxxxxxxxxxxxx>
> Co-developed-by: Raviteja Tamatam <travitej@xxxxxxxxxxxxxx>
> Signed-off-by: Raviteja Tamatam <travitej@xxxxxxxxxxxxxx>
> Signed-off-by: Kalyan Thota <kalyan_t@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/display/msm/dpu.txt        |   4 +-

Acked-by: Rob Herring <robh@xxxxxxxxxx>

>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     | 189 +++++++++++++++++++--
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   4 +
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c          |   3 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
>  drivers/gpu/drm/msm/msm_drv.c                      |   4 +-
>  6 files changed, 190 insertions(+), 15 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> index a61dd40..512f022 100644
> --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> @@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
>  
>  MDSS:
>  Required properties:
> -- compatible: "qcom,sdm845-mdss"
> +- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss"
>  - reg: physical base address and length of contoller's registers.
>  - reg-names: register region names. The following region is required:
>    * "mdss"
> @@ -41,7 +41,7 @@ Optional properties:
>  
>  MDP:
>  Required properties:
> -- compatible: "qcom,sdm845-dpu"
> +- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
>  - reg: physical base address and length of controller's registers.
>  - reg-names : register region names. The following region is required:
>    * "mdp"



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux