The redistributable firmware should work on any engineering device, so
lets push this to qcom/sdm845, rather than qcom/db845c. Also specify the
path for the modem firmware.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index d100f46791a6..c4f6c6695bbd 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -197,7 +197,7 @@
&adsp_pas {
status = "okay";
- firmware-name = "qcom/db845c/adsp.mdt";
+ firmware-name = "qcom/sdm845/adsp.mdt";
};
&apps_rsc {
@@ -343,7 +343,7 @@
&cdsp_pas {
status = "okay";
- firmware-name = "qcom/db845c/cdsp.mdt";
+ firmware-name = "qcom/sdm845/cdsp.mdt";
};
&gcc {
@@ -352,6 +352,11 @@
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
};
+&mss_pil {
+ status = "okay";
+ firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
+};
+
&pm8998_gpio {
vol_up_pin_a: vol-up-active {
pins = "gpio6";
--
2.23.0
