Re: [PATCH v9 1/4] dt-bindings: clock: Document external clocks for MSM8998 gcc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jeffrey,

On 11/13/2019 2:14 AM, Jeffrey Hugo wrote:
The global clock controller on MSM8998 can consume a number of external
clocks.  Document them.

For 7180 and 8150, the hardware always exists, so no clocks are truly
optional.  Therefore, simplify the binding by removing the min/max
qualifiers to clocks.  Also, fixup an example so that dt_binding_check
passes.

Signed-off-by: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
---
  .../devicetree/bindings/clock/qcom,gcc.yaml        | 47 +++++++++++++++-------
  1 file changed, 33 insertions(+), 14 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
index e73a56f..2f3512b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -40,20 +40,38 @@ properties:
         - qcom,gcc-sm8150
clocks:
-    minItems: 1
-    maxItems: 3
-    items:
-      - description: Board XO source
-      - description: Board active XO source
-      - description: Sleep clock source
+    oneOf:
+      #qcom,gcc-sm8150
+      #qcom,gcc-sc7180
+      - items:
+        - description: Board XO source
+        - description: Board active XO source
+        - description: Sleep clock source
+      #qcom,gcc-msm8998
+      - items:
+        - description: Board XO source
+        - description: USB 3.0 phy pipe clock
+        - description: UFS phy rx symbol clock for pipe 0
+        - description: UFS phy rx symbol clock for pipe 1
+        - description: UFS phy tx symbol clock
+        - description: PCIE phy pipe clock

Would it be possible to add an example for MSM8998?

clock-names:
-    minItems: 1
-    maxItems: 3
-    items:
-      - const: bi_tcxo
-      - const: bi_tcxo_ao
-      - const: sleep_clk
+    oneOf:
+      #qcom,gcc-sm8150
+      #qcom,gcc-sc7180
+      - items:
+        - const: bi_tcxo
+        - const: bi_tcxo_ao
+        - const: sleep_clk

Not required for SC7180.

+      #qcom,gcc-msm8998
+      - items:
+        - const: xo
+        - const: usb3_pipe
+        - const: ufs_rx_symbol0
+        - const: ufs_rx_symbol1
+        - const: ufs_tx_symbol0
+        - const: pcie0_pipe
'#clock-cells':
      const: 1
@@ -118,6 +136,7 @@ else:
        compatible:
          contains:
            enum:
+            - qcom,gcc-msm8998
              - qcom,gcc-sm8150
              - qcom,gcc-sc7180
    then:
@@ -179,8 +198,8 @@ examples:
      clock-controller@100000 {
        compatible = "qcom,gcc-sc7180";
        reg = <0x100000 0x1f0000>;
-      clocks = <&rpmhcc 0>, <&rpmhcc 1>;
-      clock-names = "bi_tcxo", "bi_tcxo_ao";
+      clocks = <&rpmhcc 0>, <&rpmhcc 1>, <0>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";

SC7180 does not require a sleep clock.

        #clock-cells = <1>;
        #reset-cells = <1>;
        #power-domain-cells = <1>;


--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

--



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux