Create a consistent naming scheme for command IDs. The scheme is
QCOM_SCM_##svc_##cmd. Remove unused macros QCOM_SCM_FLAG_HLOS,
QCOM_SCM_FLAG_COLDBOOT_MC, QCOM_SCM_FLAG_WARMBOOT_MC,
QCOM_SCM_CMD_CORE_HOTPLUGGED, and QCOM_SCM_BOOT_ADDR_MC.
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Reviewed-by: Vinod Koul <vkoul@xxxxxxxxxx>
Signed-off-by: Elliot Berman <eberman@xxxxxxxxxxxxxx>
---
drivers/firmware/qcom_scm-32.c | 28 +++++++++++++--------------
drivers/firmware/qcom_scm-64.c | 38 ++++++++++++++++++-------------------
drivers/firmware/qcom_scm.c | 13 +++++--------
drivers/firmware/qcom_scm.h | 43 +++++++++++++++++++-----------------------
4 files changed, 57 insertions(+), 65 deletions(-)
diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
index 5077fcf..fca7279 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -360,7 +360,7 @@ int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
set_cpu_present(cpu, false);
}
- return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
+ return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_ADDR,
flags, virt_to_phys(entry));
}
@@ -399,7 +399,7 @@ int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
cmd.addr = cpu_to_le32(virt_to_phys(entry));
cmd.flags = cpu_to_le32(flags);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_ADDR,
&cmd, sizeof(cmd), NULL, 0);
if (!ret) {
for_each_cpu(cpu, cpus)
@@ -419,7 +419,7 @@ int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
*/
void __qcom_scm_cpu_power_down(u32 flags)
{
- qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC,
+ qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_TERMINATE_PC,
flags & QCOM_SCM_FLUSH_FLAG_MASK);
}
@@ -429,7 +429,7 @@ int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
__le32 svc_cmd = cpu_to_le32(LEGACY_FUNCNUM(svc_id, cmd_id));
__le32 ret_val = 0;
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_SCM_INFO_IS_CALL_AVAIL,
&svc_cmd, sizeof(svc_cmd), &ret_val,
sizeof(ret_val));
if (ret)
@@ -444,7 +444,7 @@ int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
return -ERANGE;
- return qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP,
+ return qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_HDCP_INVOKE,
req, req_cnt * sizeof(*req), resp, sizeof(*resp));
}
@@ -460,7 +460,7 @@ bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
in = cpu_to_le32(peripheral);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_IS_SUPPORTED_CMD,
+ QCOM_SCM_PIL_PAS_IS_SUPPORTED,
&in, sizeof(in),
&out, sizeof(out));
@@ -481,7 +481,7 @@ int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
request.image_addr = cpu_to_le32(metadata_phys);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_INIT_IMAGE_CMD,
+ QCOM_SCM_PIL_PAS_INIT_IMAGE,
&request, sizeof(request),
&scm_ret, sizeof(scm_ret));
@@ -504,7 +504,7 @@ int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
request.len = cpu_to_le32(size);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_MEM_SETUP_CMD,
+ QCOM_SCM_PIL_PAS_MEM_SETUP,
&request, sizeof(request),
&scm_ret, sizeof(scm_ret));
@@ -519,7 +519,7 @@ int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
in = cpu_to_le32(peripheral);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_AUTH_AND_RESET_CMD,
+ QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
&in, sizeof(in),
&out, sizeof(out));
@@ -534,7 +534,7 @@ int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
in = cpu_to_le32(peripheral);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_SHUTDOWN_CMD,
+ QCOM_SCM_PIL_PAS_SHUTDOWN,
&in, sizeof(in),
&out, sizeof(out));
@@ -547,7 +547,7 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
__le32 in = cpu_to_le32(reset);
int ret;
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_MSS_RESET,
&in, sizeof(in),
&out, sizeof(out));
@@ -556,8 +556,8 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
{
- return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_DLOAD_MODE,
- enable ? QCOM_SCM_SET_DLOAD_MODE : 0, 0);
+ return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_DLOAD_MODE,
+ enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0, 0);
}
int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
@@ -572,7 +572,7 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
req.state = cpu_to_le32(state);
req.id = cpu_to_le32(id);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_REMOTE_STATE,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_REMOTE_STATE,
&req, sizeof(req), &scm_ret, sizeof(scm_ret));
return ret ? : le32_to_cpu(scm_ret);
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index badc245..7de6022 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -256,7 +256,7 @@ int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
desc.args[0] = SMCCC_FUNCNUM(svc_id, cmd_id) |
(ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_SCM_INFO_IS_CALL_AVAIL,
&desc, &res);
return ret ? : res.a1;
@@ -284,7 +284,7 @@ int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
desc.args[9] = req[4].val;
desc.arginfo = QCOM_SCM_ARGS(10);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, &desc,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_HDCP_INVOKE, &desc,
&res);
*resp = res.a1;
@@ -295,7 +295,7 @@ void __qcom_scm_init(void)
{
u64 cmd;
struct arm_smccc_res res;
- u32 function = SMCCC_FUNCNUM(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD);
+ u32 function = SMCCC_FUNCNUM(QCOM_SCM_SVC_INFO, QCOM_SCM_INFO_IS_CALL_AVAIL);
/* First try a SMC64 call */
cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64,
@@ -320,7 +320,7 @@ bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
desc.arginfo = QCOM_SCM_ARGS(1);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_IS_SUPPORTED_CMD,
+ QCOM_SCM_PIL_PAS_IS_SUPPORTED,
&desc, &res);
return ret ? false : !!res.a1;
@@ -337,7 +337,7 @@ int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
desc.args[1] = metadata_phys;
desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_INIT_IMAGE_CMD,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_INIT_IMAGE,
&desc, &res);
return ret ? : res.a1;
@@ -355,7 +355,7 @@ int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
desc.args[2] = size;
desc.arginfo = QCOM_SCM_ARGS(3);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MEM_SETUP_CMD,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_MEM_SETUP,
&desc, &res);
return ret ? : res.a1;
@@ -371,7 +371,7 @@ int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
desc.arginfo = QCOM_SCM_ARGS(1);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_AUTH_AND_RESET_CMD,
+ QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
&desc, &res);
return ret ? : res.a1;
@@ -386,7 +386,7 @@ int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
desc.args[0] = peripheral;
desc.arginfo = QCOM_SCM_ARGS(1);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_SHUTDOWN_CMD,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_SHUTDOWN,
&desc, &res);
return ret ? : res.a1;
@@ -402,7 +402,7 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
desc.args[1] = 0;
desc.arginfo = QCOM_SCM_ARGS(2);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET, &desc,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_MSS_RESET, &desc,
&res);
return ret ? : res.a1;
@@ -418,7 +418,7 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
desc.args[1] = id;
desc.arginfo = QCOM_SCM_ARGS(2);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_REMOTE_STATE,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_REMOTE_STATE,
&desc, &res);
return ret ? : res.a1;
@@ -445,7 +445,7 @@ int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
QCOM_SCM_VAL, QCOM_SCM_VAL);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
- QCOM_MEM_PROT_ASSIGN_ID,
+ QCOM_SCM_MP_ASSIGN,
&desc, &res);
return ret ? : res.a1;
@@ -461,7 +461,7 @@ int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare)
desc.args[1] = spare;
desc.arginfo = QCOM_SCM_ARGS(2);
- ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, QCOM_SCM_RESTORE_SEC_CFG,
+ ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, QCOM_SCM_MP_RESTORE_SEC_CFG,
&desc, &res);
return ret ? : res.a1;
@@ -478,7 +478,7 @@ int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
desc.arginfo = QCOM_SCM_ARGS(1);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
- QCOM_SCM_IOMMU_SECURE_PTBL_SIZE, &desc, &res);
+ QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE, &desc, &res);
if (size)
*size = res.a1;
@@ -500,7 +500,7 @@ int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
QCOM_SCM_VAL);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
- QCOM_SCM_IOMMU_SECURE_PTBL_INIT, &desc, &res);
+ QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT, &desc, &res);
/* the pg table has been initialized already, ignore the error */
if (ret == -EPERM)
@@ -514,11 +514,11 @@ int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
struct qcom_scm_desc desc = {0};
struct arm_smccc_res res;
- desc.args[0] = QCOM_SCM_SET_DLOAD_MODE;
- desc.args[1] = enable ? QCOM_SCM_SET_DLOAD_MODE : 0;
+ desc.args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE;
+ desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
desc.arginfo = QCOM_SCM_ARGS(2);
- return qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_DLOAD_MODE,
+ return qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_DLOAD_MODE,
&desc, &res);
}
@@ -558,10 +558,10 @@ int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev, bool en)
struct qcom_scm_desc desc = {0};
struct arm_smccc_res res;
- desc.args[0] = QCOM_SCM_CONFIG_ERRATA1_CLIENT_ALL;
+ desc.args[0] = QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL;
desc.args[1] = en;
desc.arginfo = QCOM_SCM_ARGS(2);
return qcom_scm_call_atomic(dev, QCOM_SCM_SVC_SMMU_PROGRAM,
- QCOM_SCM_CONFIG_ERRATA1, &desc, &res);
+ QCOM_SCM_SMMU_CONFIG_ERRATA1, &desc, &res);
}
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index a729e05..72757c5 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -1,8 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Qualcomm SCM driver
- *
- * Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010,2015,2019 The Linux Foundation. All rights reserved.
* Copyright (C) 2015 Linaro Ltd.
*/
#include <linux/platform_device.h>
@@ -142,7 +139,7 @@ bool qcom_scm_hdcp_available(void)
return ret;
ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP,
- QCOM_SCM_CMD_HDCP);
+ QCOM_SCM_HDCP_INVOKE);
qcom_scm_clk_disable();
@@ -183,7 +180,7 @@ bool qcom_scm_pas_supported(u32 peripheral)
int ret;
ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PAS_IS_SUPPORTED_CMD);
+ QCOM_SCM_PIL_PAS_IS_SUPPORTED);
if (ret <= 0)
return false;
@@ -370,12 +367,12 @@ static void qcom_scm_set_download_mode(bool enable)
avail = __qcom_scm_is_call_available(__scm->dev,
QCOM_SCM_SVC_BOOT,
- QCOM_SCM_SET_DLOAD_MODE);
+ QCOM_SCM_BOOT_SET_DLOAD_MODE);
if (avail) {
ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
} else if (__scm->dload_mode_addr) {
ret = __qcom_scm_io_writel(__scm->dev, __scm->dload_mode_addr,
- enable ? QCOM_SCM_SET_DLOAD_MODE : 0);
+ enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
} else {
dev_err(__scm->dev,
"No available mechanism for setting download mode\n");
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index baee744..dfb5db2 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -1,27 +1,22 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/* Copyright (c) 2010-2015, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2015,2019 The Linux Foundation. All rights reserved.
*/
#ifndef __QCOM_SCM_INT_H
#define __QCOM_SCM_INT_H
#define QCOM_SCM_SVC_BOOT 0x1
-#define QCOM_SCM_BOOT_ADDR 0x1
-#define QCOM_SCM_SET_DLOAD_MODE 0x10
-#define QCOM_SCM_BOOT_ADDR_MC 0x11
-#define QCOM_SCM_SET_REMOTE_STATE 0xa
+#define QCOM_SCM_BOOT_SET_ADDR 0x1
+#define QCOM_SCM_BOOT_SET_DLOAD_MODE 0x10
+#define QCOM_SCM_BOOT_SET_REMOTE_STATE 0xa
extern int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id);
extern int __qcom_scm_set_dload_mode(struct device *dev, bool enable);
-#define QCOM_SCM_FLAG_HLOS 0x01
-#define QCOM_SCM_FLAG_COLDBOOT_MC 0x02
-#define QCOM_SCM_FLAG_WARMBOOT_MC 0x04
extern int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
const cpumask_t *cpus);
extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
-#define QCOM_SCM_CMD_TERMINATE_PC 0x2
+#define QCOM_SCM_BOOT_TERMINATE_PC 0x2
#define QCOM_SCM_FLUSH_FLAG_MASK 0x3
-#define QCOM_SCM_CMD_CORE_HOTPLUGGED 0x10
extern void __qcom_scm_cpu_power_down(u32 flags);
#define QCOM_SCM_SVC_IO 0x5
@@ -31,24 +26,24 @@ extern int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr, unsigned in
extern int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val);
#define QCOM_SCM_SVC_INFO 0x6
-#define QCOM_IS_CALL_AVAIL_CMD 0x1
+#define QCOM_SCM_INFO_IS_CALL_AVAIL 0x1
extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
u32 cmd_id);
#define QCOM_SCM_SVC_HDCP 0x11
-#define QCOM_SCM_CMD_HDCP 0x01
+#define QCOM_SCM_HDCP_INVOKE 0x01
extern int __qcom_scm_hdcp_req(struct device *dev,
struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp);
extern void __qcom_scm_init(void);
#define QCOM_SCM_SVC_PIL 0x2
-#define QCOM_SCM_PAS_INIT_IMAGE_CMD 0x1
-#define QCOM_SCM_PAS_MEM_SETUP_CMD 0x2
-#define QCOM_SCM_PAS_AUTH_AND_RESET_CMD 0x5
-#define QCOM_SCM_PAS_SHUTDOWN_CMD 0x6
-#define QCOM_SCM_PAS_IS_SUPPORTED_CMD 0x7
-#define QCOM_SCM_PAS_MSS_RESET 0xa
+#define QCOM_SCM_PIL_PAS_INIT_IMAGE 0x1
+#define QCOM_SCM_PIL_PAS_MEM_SETUP 0x2
+#define QCOM_SCM_PIL_PAS_AUTH_AND_RESET 0x5
+#define QCOM_SCM_PIL_PAS_SHUTDOWN 0x6
+#define QCOM_SCM_PIL_PAS_IS_SUPPORTED 0x7
+#define QCOM_SCM_PIL_PAS_MSS_RESET 0xa
extern bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral);
extern int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
dma_addr_t metadata_phys);
@@ -86,21 +81,21 @@ static inline int qcom_scm_remap_error(int err)
}
#define QCOM_SCM_SVC_MP 0xc
-#define QCOM_SCM_RESTORE_SEC_CFG 2
+#define QCOM_SCM_MP_RESTORE_SEC_CFG 2
extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
u32 spare);
-#define QCOM_SCM_IOMMU_SECURE_PTBL_SIZE 3
-#define QCOM_SCM_IOMMU_SECURE_PTBL_INIT 4
+#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE 3
+#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT 4
#define QCOM_SCM_SVC_SMMU_PROGRAM 0x15
-#define QCOM_SCM_CONFIG_ERRATA1 0x3
-#define QCOM_SCM_CONFIG_ERRATA1_CLIENT_ALL 0x2
+#define QCOM_SCM_SMMU_CONFIG_ERRATA1 0x3
+#define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL 0x2
extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
size_t *size);
extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
u32 size, u32 spare);
extern int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev,
bool enable);
-#define QCOM_MEM_PROT_ASSIGN_ID 0x16
+#define QCOM_SCM_MP_ASSIGN 0x16
extern int __qcom_scm_assign_mem(struct device *dev,
phys_addr_t mem_region, size_t mem_sz,
phys_addr_t src, size_t src_sz,
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
