Re: [PATCH V2] mfd: qcom-spmi-pmic: Add support for pm6150 and pm6150l

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Kiran Gunda (2019-11-04 21:21:49)
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> index 1437062..b5fc64e 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> @@ -32,6 +32,8 @@ Required properties:
>                     "qcom,pm8998",
>                     "qcom,pmi8998",
>                     "qcom,pm8005",
> +                  "qcom,pm6150",
> +                  "qcom,pm6150l",

This seems to match the compatible list in the driver. Can you convert
this binding to YAML and then sort this compatible string list
alpha-numberically? Two patches, one to convert to YAML and sort and
another patch to add these new compatible strings.

>                     or generalized "qcom,spmi-pmic".
>  - reg:             Specifies the SPMI USID slave address for this device.
>                     For more information see:
> diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c
> index e8fe705..74b7980 100644
> --- a/drivers/mfd/qcom-spmi-pmic.c
> +++ b/drivers/mfd/qcom-spmi-pmic.c
> @@ -34,6 +34,8 @@
>  #define PM8998_SUBTYPE         0x14
>  #define PMI8998_SUBTYPE                0x15
>  #define PM8005_SUBTYPE         0x18
> +#define PM6150_SUBTYPE         0x28
> +#define PM6150L_SUBTYPE                0x27

This list looks to be sorted based on id number, so just swap the two
here.

>  
>  static const struct of_device_id pmic_spmi_id_table[] = {
>         { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE },
> @@ -53,6 +55,8 @@
>         { .compatible = "qcom,pm8998",    .data = (void *)PM8998_SUBTYPE },
>         { .compatible = "qcom,pmi8998",   .data = (void *)PMI8998_SUBTYPE },
>         { .compatible = "qcom,pm8005",    .data = (void *)PM8005_SUBTYPE },
> +       { .compatible = "qcom,pm6150",    .data = (void *)PM6150_SUBTYPE },
> +       { .compatible = "qcom,pm6150l",   .data = (void *)PM6150L_SUBTYPE },

This is also sorted based on .data value, so swap the two here too.

>         { }




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux