Re: [PATCHv2 0/3] Add LLCC support for SC7180 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 24, 2019 at 6:00 AM Sai Prakash Ranjan
<saiprakash.ranjan@xxxxxxxxxxxxxx> wrote:
>
> Hi Rob,
>
> On 2019-10-24 01:19, Rob Herring wrote:
> > On Sun, Oct 20, 2019 at 10:32 PM Bjorn Andersson
> > <bjorn.andersson@xxxxxxxxxx> wrote:
> >>
> >> On Sat 19 Oct 04:37 PDT 2019, Sai Prakash Ranjan wrote:
> >>
> >> > LLCC behaviour is controlled by the configuration data set
> >> > in the llcc-qcom driver, add the same for SC7180 SoC.
> >> > Also convert the existing bindings to json-schema and add
> >> > the compatible for SC7180 SoC.
> >> >
> >>
> >> Thanks for the patches and thanks for the review Stephen. Series
> >> applied
> >
> > And they break dt_binding_check. Please fix.
> >
>
> I did check this and think that the error log from dt_binding_check is
> not valid because it says cache-level is a required property [1], but
> there is no such property in LLCC bindings.

Then you should point out the issue and not just submit stuff ignoring
it. It has to be resolved one way or another.

If you refer to the DT spec[1], cache-level is required. The schema is
just enforcing that now. It's keying off the node name of
'cache-controller'.

Rob

[1] https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicenodes.rst#multi-level-and-shared-cache-nodes-cpuscpul-cache



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux