Re: [PATCH 5/5] ARM: dts: qcom: msm8974: add interconnect nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23.10.19 г. 16:39 ч., Georgi Djakov wrote:
> On 23.10.19 г. 15:47 ч., Brian Masney wrote:
>> On Wed, Oct 23, 2019 at 02:50:19PM +0300, Georgi Djakov wrote:
>>> On 13.10.19 г. 11:08 ч., Brian Masney wrote:
>>>> Add interconnect nodes that's needed to support bus scaling.
>>>>
>>>> Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
>>>> ---
>>>>  arch/arm/boot/dts/qcom-msm8974.dtsi | 60 +++++++++++++++++++++++++++++
>>>>  1 file changed, 60 insertions(+)
>>>>
>>>> diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
>>>> @@ -1152,6 +1207,11 @@
>>>>  				              "core",
>>>>  				              "vsync";
>>>>  
>>>> +				interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
>>>> +				                <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
>>>
>>> Who will be the requesting bandwidth to DDR and ocmem? Is it the display or GPU
>>> or both? The above seem like GPU-related interconnects, so maybe these
>>> properties should be in the GPU DT node.
>>
>> The display is what currently requests the interconnect path,
>> specifically mdp5_setup_interconnect() in
>> drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c. The Freedreno GPU bindings
>> currently don't have interconnect support. Maybe this is something that
>> I should add to that driver as well?
> 
> The "mdp0-mem" and "mdp1-mem" paths mentioned in the mdp5_kms.c are the two
> interconnects between the display and DDR memory. There is actually a patch [1]
> to add to GPU bindings, but it seems that we missed to pick it up.

It was actually merged in v5.2.

BR,
Georgi

>>>> +				interconnect-names = "mdp0-mem",
>>>> +				                     "mdp1-mem";
>>>
>>> As the second path is not to DDR, but to ocmem, it might be better to call it
>>> something like "gpu-ocmem".
>>
>> I used what mdp5_kms.c expected.
> 
> This is for the display and here [2] are some patches for the GPU. Not sure how
> the NoCs are configured on 8974 by default, but if you notice any blue/black
> screens, you may need to request bandwidth for display too.
> 
> Thanks,
> Georgi
> 
> [1]
> https://lore.kernel.org/r/1555703787-10897-1-git-send-email-jcrouse@xxxxxxxxxxxxxx
> [2] https://lore.kernel.org/r/20181220173026.3857-1-jcrouse@xxxxxxxxxxxxxx
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux